View Poll Results: Poll requested: Champion or TPC
Champion



59
45.04%
TPC



60
45.80%
Tie



12
9.16%
Voters: 131. You may not vote on this poll
Champion vs TPC challenge
That answers my question
Champion 68mm exducer VTG Turbo kit VS TPC 775 Kit
PS
My guess on the exducer compressor size(61.5mm stock 60mm)
of TPC VTG turbos from this quote
"
TPC achieved 700 horses on pump gas by modifying the turbochargers with larger compressor wheels, with major (exducer) and minor (inducer) dia meters enlarged by 1.5 mm and 2.0 mm respectively
"
Champion 68mm exducer VTG Turbo kit VS TPC 775 Kit
PS
My guess on the exducer compressor size(61.5mm stock 60mm)
of TPC VTG turbos from this quote
"
TPC achieved 700 horses on pump gas by modifying the turbochargers with larger compressor wheels, with major (exducer) and minor (inducer) dia meters enlarged by 1.5 mm and 2.0 mm respectively
"
Fastlaw,
We are very happy to hear that you see value in a thread like this. Just wait until the event.
All items on this VTG equipped 997.1TT will be released to the public.
Vehicle of choice for Champion Motorsport ----> https://www.6speedonline.com/forums/...otorsport.html
We are very happy to hear that you see value in a thread like this. Just wait until the event.
All items on this VTG equipped 997.1TT will be released to the public.
Vehicle of choice for Champion Motorsport ----> https://www.6speedonline.com/forums/...otorsport.html

I'm looking forward to this "shootout". I don't know what trash talking has been going on (I guess I missed that thread) but neither side here needs to trash talk since both of them have proven track records.
I too would love to see ANY tuner compete but I can understand where this is somewhat a grudge match and therefore closed to all others.
I have to wonder how fair it would be now that Champion has just developed their 68mm VTG whereas most other tuners, including TPC I suspect, are using smaller VTG's. Sounds like TPC will be bringing a knife to a gun fight IMO.
Hope this takes place close enough for me to attend.
I have to wonder how fair it would be now that Champion has just developed their 68mm VTG whereas most other tuners, including TPC I suspect, are using smaller VTG's. Sounds like TPC will be bringing a knife to a gun fight IMO.
Hope this takes place close enough for me to attend.
This is fantastic.. I love 6speed for having the ***** to allow 2 vendors to have a friendly competition regardless of what started the contest.. It will take a well rounded car to win this.. My only input is I would like to see this on a Dynojet Dyno.. too many variables involved with vehicle weight and calibration of a MD or Dyno dynamics.. To have less variables i think it should be done on a Dynojet thats all..
Mike
Mike
If its down here the Time trial should take place at Sebring not this rinky dink track PBIR has.. Sebring is a horsepower track 2x the size of PBIR and both camps are probably familiar with Sebring.. Just my .02..
Mike
Mike

Mike
Track rental for MIR in Maryland is open until early December; and one of the quickest tracks in the states. A track rental for the day would be EPIC; all us east coast Turbos/GT2s can come down for the day and get some runs in as well. Id love to get some 1/4 mile times with my evt700 package along with many other 6speeders
. I remember a couple years back, some mercedes tuners had a shoot out similar to this at MIR. The weather is getting colder and thats when these cars are gonna get the best times.. FL is too hot!
. I remember a couple years back, some mercedes tuners had a shoot out similar to this at MIR. The weather is getting colder and thats when these cars are gonna get the best times.. FL is too hot!





