Paddle shifter retrofit to 997.1? - Page 2 - 6SpeedOnline - Porsche Forum and Luxury Car Resource

Sep 27, 2017 | 10:57 AM

#16

DerrickYap

Registered User

Joined: Sep 2017

Posts: 10

From: Cebu City

Rep Power: 0

DerrickYap is infamous around these parts

Quote:

Originally Posted by ctony66

the upper picture is the new style wheel so if that's what you are installing you won't have the ribbon cable. That's from an older style set up. The newer module is identical to the one in the car now but will accept pdk programming. The module is under the stalk and clockspring towards the dash. Hope that helps.

Thank you so much for the quick response... Will the new module from 997.2 fit the stalk of my existing 997.1? and by the way most of the pics posted in this thread there is 4 levers at the stalk but the original of the 997.1 is only 3 levers withoit the cruise control...

Sep 27, 2017 | 12:52 PM

#17

ctony66

Registered User

Joined: Oct 2014

Posts: 471

From: new york

Rep Power: 92

yes the newer module will fit. but don't forget you will need a shop with a piwis to program it.

Sep 27, 2017 | 06:13 PM

#18

DerrickYap

Registered User

Joined: Sep 2017

Posts: 10

From: Cebu City

Rep Power: 0

Quote:

Originally Posted by ctony66

yes the newer module will fit. but don't forget you will need a shop with a piwis to program it.

yes i got a shop with updated piwis... Just my concern is the module of 997.1 and 997.2 is exactly the same size and dimension? thank you for helping Sir ctony66

Sep 28, 2017 | 11:07 AM

#19

ctony66

Registered User

Joined: Oct 2014

Posts: 471

From: new york

Rep Power: 92

Quote:

Originally Posted by DerrickYap

yes i got a shop with updated piwis... Just my concern is the module of 997.1 and 997.2 is exactly the same size and dimension? thank you for helping Sir ctony66

they are exactly the same. Just a different part #