ESMOTOR - Newest sponsor on 6speed
Registered User
Joined: Nov 2008
Posts: 118
From: Russia Rostov-on-Don
Rep Power: 22
Yesterday, after Todd have make new tune for MS109 for my car, i have try and find gearbox is spin 
Now i think about tip upgrade from Emre and GT30)
Now i think about tip upgrade from Emre and GT30)
Thread Starter
|
Banned
Joined: Aug 2011
Posts: 670
From: Istanbul - Turkey
Rep Power: 0
Hello to everyone,
Thank you very much for your kind words.
I'm happy to be back.
This mafless intake kit is completely 100mm wide (4inch) and its made of carbon/kevlar. It's very light and solid.
We designed it to eliminate the intake restrictions for the big turbo setups.
We have tested these on our Garrett GT/GTX series turbo kits, they really improved throttle response and turbo spool.
If you want to use your maf sensors, its also possible to mount it with a smaller silicone hose.
This manifold is customized to fit to 997tt engine. It's based on the 997 GT3 Cup car manifold.
If you don't have big ported cylinder heads, there is no benefit to use this, because OEM 997TT cylinders heads are smaller compared to this manifold runners.
Thank you very much for your kind words.
I'm happy to be back.
This mafless intake kit is completely 100mm wide (4inch) and its made of carbon/kevlar. It's very light and solid.
We designed it to eliminate the intake restrictions for the big turbo setups.
We have tested these on our Garrett GT/GTX series turbo kits, they really improved throttle response and turbo spool.
If you want to use your maf sensors, its also possible to mount it with a smaller silicone hose.
If you don't have big ported cylinder heads, there is no benefit to use this, because OEM 997TT cylinders heads are smaller compared to this manifold runners.
Registered User
Joined: Nov 2009
Posts: 724
From: Long Island, New York
Rep Power: 55
Emre, can you tell us more about the intake system? Your set up looks like it gets rid of the OEM Plemum and the throttle body mounts right up to it. It looks way more beneficial than the stock set up and way more beneficial compared to the larger plenum and throttle body upgrade. Brilliant idea- PM pricing please .
Thread Starter
|
Banned
Joined: Aug 2011
Posts: 670
From: Istanbul - Turkey
Rep Power: 0
Emre, can you tell us more about the intake system? Your set up looks like it gets rid of the OEM Plemum and the throttle body mounts right up to it. It looks way more beneficial than the stock set up and way more beneficial compared to the larger plenum and throttle body upgrade. Brilliant idea- PM pricing please .
I wrote some information about this manifold in my previous post above.
Runners are bigger than 997tt manifold by ~10mm.
If you want to get most out of this manifold you must have ported heads.
It's an overkill for stock heads, no need unless you plan for engine build.
Will send PM about pricing.
Thanks,
Emre
Registered User
Joined: Jul 2008
Posts: 536
From: Istanbul Turkey
Rep Power: 49
dont ask, just order one from Emre. I ve seen the cooler in person, looks top notch
Cmon man dont question just get one and cool your trans 
. Its not a computer, nor a TV, just a high quality trans cooler, If I were living in your climate I would not wait.
Last edited by TwinTurboM3; Sep 29, 2011 at 04:33 AM.
Registered User
Joined: May 2008
Posts: 1,768
From: Cyprus
Rep Power: 110
LOL man, I would never buy anything without seeing it first. I'm sure that it would be a great modd and good quality but I need to see it first. Also this might not be needed for VTG based kits.