Blue demon from Russia with love :)
Blue demon from Russia with love :)
Hi guys, I have long read this forum, but did not write anything.
I decided to show my car.
With this mods i got 1020Hp and 1076Nm on 1,75 bar (25psi):
Turbos Tial HTA3076
IC 5" Switzer
Exaust 3" Switzer
Intake and pipe 3" Switzer
Blowoff Tial 2x38mm
Carillo Rods
Headstuds ARP L19
Camshafts DbilasDynamic custom
Injectors Protomotive 880cc
ECU Protomotive
TCU PP-Performance
Tiptronic rebuild RacingParts.ru
Vorsteiner front and rear bumper
Techart side skirts
Advan RZ-DF Rims
Hoosier A6 Tires
Best 1/4 mile 9,9@235km/h (147mph) http://www.dragtimes.ru/results
0-100km/h 3,1 sec
100-200km/h 4,4 sec
200-300km/h 10,3 sec
Best 1 mile 25,1@307km/h (P3402 problem)
Best 1 mile speed 328km/h (205mph) with same problem...
I decided to show my car.
With this mods i got 1020Hp and 1076Nm on 1,75 bar (25psi):
Turbos Tial HTA3076
IC 5" Switzer
Exaust 3" Switzer
Intake and pipe 3" Switzer
Blowoff Tial 2x38mm
Carillo Rods
Headstuds ARP L19
Camshafts DbilasDynamic custom
Injectors Protomotive 880cc
ECU Protomotive
TCU PP-Performance
Tiptronic rebuild RacingParts.ru
Vorsteiner front and rear bumper
Techart side skirts
Advan RZ-DF Rims
Hoosier A6 Tires
Best 1/4 mile 9,9@235km/h (147mph) http://www.dragtimes.ru/results
0-100km/h 3,1 sec
100-200km/h 4,4 sec
200-300km/h 10,3 sec
Best 1 mile 25,1@307km/h (P3402 problem)
Best 1 mile speed 328km/h (205mph) with same problem...
Now we made some modifications to fuel system, ID 2000 injectors, 3 in tank fuel pumps
Full rebuild of intake and turbo system, GTX3582 0,63A/R, Proto headers with external WG, Proto straight pipes and our custom intake 3" like stock
Stall speed of TQ was set to 4000rpm to make realy good launches (because with stock TQ i have very bad 60ft 1,8-2)
I'll post fotos of new build soon!
Expecting 1/4 mile 9,5 or less and 1 mile less than 24 sec with 215-220 mph
Thanks to Todd from Protomotive for support and hardware
Full rebuild of intake and turbo system, GTX3582 0,63A/R, Proto headers with external WG, Proto straight pipes and our custom intake 3" like stock
Stall speed of TQ was set to 4000rpm to make realy good launches (because with stock TQ i have very bad 60ft 1,8-2)
I'll post fotos of new build soon!
Expecting 1/4 mile 9,5 or less and 1 mile less than 24 sec with 215-220 mph
Thanks to Todd from Protomotive for support and hardware
Site Sponsor
Joined: Mar 2004
Posts: 3,405
From: Miami, Florida
Rep Power: 176
That is awesome !
__________________
Wheels Boutique // 786 249 0127 // Sales@wheelsboutique.com
Follow us on YouTube: www.youtube.com/user/WheelsBoutique
Largest HRE Dealer In The World / Largest ANRKY Dealer / BBS Premium Dealer / TechArt Premium Dealer / Vorsteiner / Rotiform / Akrapovic / iPE / Novitec / Brabus / AC Schnitzer / Mansory / Brembo / RENNTech / Weistec / Tubi / Hamman / KW / H&R and tons more.
Wheels Boutique // 786 249 0127 // Sales@wheelsboutique.com
Follow us on YouTube: www.youtube.com/user/WheelsBoutique
Largest HRE Dealer In The World / Largest ANRKY Dealer / BBS Premium Dealer / TechArt Premium Dealer / Vorsteiner / Rotiform / Akrapovic / iPE / Novitec / Brabus / AC Schnitzer / Mansory / Brembo / RENNTech / Weistec / Tubi / Hamman / KW / H&R and tons more.
Registered User
Joined: Nov 2009
Posts: 724
From: Long Island, New York
Rep Power: 55
Insane car, My tiptronic has almost the exact same mods as you, including the motor build. What kind of fuel are you running?
Trending Topics
Car was dynoed at Superflow awd-880 dyno, 1020hp on crank or 820hp on wheels.
Target is 1000whp+!
