Hi guys,

some month ago I updated my 997.1 MK with the 997.2 Turbo front bumper and use the lower light as a daydrive light as well as the LEDs inside the indicator.

I still have the problem with a failure message in the dash about the front indicator and the inside indicator signal is flashing faster but the outside is flashing normal.

I think this was done several times before but I can't find an answer in the search function.

Would be nice to get some help.

All the best
Thanks
David

 

Nobody knows a solution?

 

i have the same issue！！！

 

I'm going through the same issue but on the rear end conversion to 997.2. Hopefully, you have a 2007 or 2008 car with that front control module 997 610 104 11. If so FVD makes a controller that is just plug and play . Otherwise you need to buy the 2009 control module 997 618 513 01 and have some pins changed for LED and DRL's. I watched my tech pull off the sleeve connectors that lock the harness into the control module. There is a blue and a black one. He then was able to show me where the Pin changes happen. It's crazy. Hopefully you can avoid all that and just go with the FVD controllers.

Currently I have the fast indicator on my dash and normal up front like you said. I also am getting warnings on my dash. I take my car in on Tuesday and hopefully will be corrected. Good Luck!

 

add a 25w resistant and it will work fine！