Hey Guys,
Here's a little DIY to customize those Porsche keys, while everyone is stuck at home.
Here's the materials that you will need:
-Porsche Key
-Heat Gun/Hair Dryer
-Color of Choice Vinyl Wrap
-Xacto Knife
1) Grab some Isopropyl Alcohol mixed with water (2:1), and properly clean the keys for the vinyl to adhere properly.
2) Cut Enough Material to cover the front side of the key.
3) Slowly wrap the key till the surface is smooth and no bubbles are present.
4) Cut the excess wrap and try not to scratch the key in the process, so take your time.
5) Repeat Steps 1-4 for the back side of the key.
6) Enjoy the new look of the key.

I personally love the look of they keys now and I wish I did this sooner. I completed both keys in about an hour. This DIY is really simple and only requires patience. Here's are a couple pictures of how mine turned out.
[img]blob:https://www.6speedonline.com/ebb3dcf8-8d9f-4361-b036-47e1f07fadef[/img]
[img]blob:https://www.6speedonline.com/1f00fb4e-92c7-4556-aca2-8ac345535db0[/img]
[img]blob:https://www.6speedonline.com/c62f8d32-c94b-4b55-939b-49ceaf80240c[/img]
[img]blob:https://www.6speedonline.com/e4f16f5b-0376-4ff6-9c63-c1368475c477[/img]