Can anyone help me? Need to know if the brakes (pccb) complete kit, rotors and calipers of a GT3RS will fit a 997.1 turbo?

 

Probably will. As far as I know of the PCCBs from the GT3RS are identical to the ones in the Turbo.

 

I though the GT cars had different rotor offsets? I know for SURE the GT3 rotors will not fit the Turbo because of the different offset.

 

I hope you're going to do more due diligence than just depending on random answers here. Just a quick look at the Suncoast website shows different front rotor part numbers for the 997.1 GT3RS and the 997.1 TT.

997.1 GT3RS PCCB Front Rotor Set
Code: 99735103193AND99735103293
997.1 Turbo PCCB Front Rotor Set
Code: 99735103132AND99735103232
Probably other differences too - best to ask an expert.

 

I bought i new pccb set complete, add said from a 997 turbo s 2011 with 20 miles. And what i got was a new set with black hubs, so right away i noticed there not the rotors in the picture so i checked and the only ones that come with black hubs are the gt2rs or gt3rs. And i just called GMG and the guy there told me they will not fit in the front, the offset on the hub is diffrent, witch is what i thought.

 

Sorry, hence the "Probably". You never know for sure, until you compare part numbers.
As far as I know the diameter of the rotor is the same (or at most the same, hence the size will not be a problem).
Can't you return the rotors? You seem to have been misled into buying them.

This is for the 997.2 GT3 RS:

PCCB Front Rotor Set
Code: 99735103196 AND 99735103296
PCCB Rear Rotor Set
Code: 99735203194 AND 99735203294

 

997 turbo, 6892 g, 33.8mm
997 gts, 5472 g, 33.7mm

Too bad they don't fit, Anyone want a new pccb kit for a gt3rs?

 

I'll take it.

 

Did you buy those from Ebay?

 

ya the guys i got them from are straight, they would take them back no problem, but i rather sell them, i still dint even get the bill for the taxes and duties. There brand new and worth there weight in gold, for those who have pccb,s you know what im talking about. Exspecialy being of a 2011 rs. I think the calipers are 2.5lbs lighter, so 10lbs total over stadard pccb calipers. I know n the gt2rs they are. And both rs,s use the black hats. Pretty dame nice!

 

Clear your PM box as it's full or better yet PM me ?

 

Did you get my PM?

 

Slick997,
If you're still looking for a set of PCCB's for your Turbo, I have a set here in Ottawa.
Less than 1200 miles on them, great condition. Most of mileage was on the dyno or street tuning the Switzer package, never tracked.

https://www.6speedonline.com/forums/...ccb-value.html

 

I would want a complete kit, including calipers.
I have a set on my R911, but i think its sold, so i was trying to have a complete kit put aside so i can look for a cheaper 08 with out pccb,s.

 

Calipers are still on the car, although they could be negotiated as well. I'll just need to source a replacement if you decided to take them.
R911... Switzer build?