Hi ,

does anyone happen to have the adapter: 997 351 505 04 lying around? Dignity would like to build, I would already be enough.
That's the adapter to convert the 997 Tubo steel (350mm) to 997 Turbo ceramic (380mm).


Thanks in advance!

 

I have 2 new ones that i never used, $290 shipped. I paid $340.

 

thats nice, but i am in germany!

 

will these actually work? I thought I remember reading the uprights have difference spacing?

 

if you drive 380mm PCCB on your 997 TT than you have the adapter for the caliper 225mm. Have you 350mm steel than you have no adapter and a caliper with 142mm.

If you want change the 380mm PCCB for steel disc than you van buy 991 Turbo discs with 380mm. The discs are plug and play!

 

991 Turbo have the same rotor offsets front and rear?

 

you can drive the 991TT steel disc on a 997TT with PCCB at the front. At the rear you can choose the caliper with the caliper from the 991TT than you can drive the 380mm disc from the 991TT.
With this combination have you the 380mm at the front and rear in steel.

regards

 

So if I have 997.2tt with steel discs

What do I need to go 380mm?

I'm confused a little.


Soon I'll need brake discs and if I can do 380mm.. then better than 350mm

 

I believe the 997.2s already have 380mm brakes. This is for the 997.1s that have steel rotors. The PCCBs .1s are 380mm as well.

 

Ahaaaa

Thanks buddy

 

That's the GT cars...997.2 Turbo Steel is still 350mm

 

Gotcha. I stand corrected. I could have sworn they were 380mm. Thx

 

I believe 991 Turbo steel is 380...

 

Yes the 991 TT steel has 380mm front and rear

 

I contacted GIRODisc a few weeks ago, was hoping they had a 350 to 380 conversion using the OEM callipers similar to what they offered for the 996, but they didn't unfortunately.