Anton28 - The Ceramic brakes on my V12S have no dust or squeal, the big benefit of ceramics. The problem is they can be destroyed by cleaning overspray - I'd rather have the dust and squeal and not worry about spraying the wrong cleaning fluid on my wheels to destroy the brakes.

 

Take your wheels off, clean them perfectly and then put 2x coats of 22ple Wheel and Metal coating or Kamikaze Stance wheel coating. This will not only put a protection on the wheels clear coat and keep them like new for many years to come, but also prevent you from having to use ANY type of wheel cleaner. All you will need to use is regular car wash soap and water and probably just a microfiber towel. I use Kirkland yellow MF towels on my wheels to wash and Wheel Woolies. For drying use Gyeon Silk Dryer. For removing polish, wax, or wiping with spray type products use Rag Company Edgeless only 350 gsm purple and/or 500gsm towels.

Contact me if you want further information. Typically a deatailer SHOULD charge around $650 to remove, clean, and apply 2x coats of one of those two coatings.

 

Gene, I can get porterfield to make some for us. Can you shoot me an email at stuart@velocityap.com?