Hey guys,

I combed through a lot of threads about oil changes etc and I know lots of you have lifts. There's also a bunch of people that have built custom low profile ramps etc but I can't find any definitive info on whether or not standard Amazon/Autozone ramps will work with a standard non lowered version. I have an 06' by the way.

Thank you!

 

Should clear. You're talking about Rhino ramps? I had a 07 V8V stock setup that cleared.

 

Okay thank you!!! Yeah just the standard Rhino ramps like the ones below:

 

i bought a pair of black polyurethane ramps at walmart for my 2007 8v8. the car can easily be pulled on forward or backed onto them. no problem. in fact, to facilitate a DIY oil/filter job, i backed the car on to them, then jacked up the left and put a jackstand under it, and then the same for the right side. that made for a level car with access to the underside.

these are the ones: https://www.walmart.com/ip/RhinoGear...3&from=/search

 

See this:
https://www.raceramps.com/angleofapp...me=Custom+Link

 

I got some from princess autos..was too low for them..took them back…

 

I agree with gaussianmist - Race Ramps are the way to go. I use them on my corvette with no problems.

 

Okay so got the Rhino ramps. They definitely DO NOT clear the front. This is for an 06 V8 Vantage- stock height and stock front bar.