I have 1 set of used champion MONO light wheels ..1 piece forged ultra light mesh wheels .. they are for 996TT or C4S mounted on pirelli 234/35/19 and 295/30/19 Rosso tires frotn tires have 85% tread left rears have a little life left ..3500.00 and they are yours ..can ship anywhere in the usa ..19x8.5 and 19x11.5

 

Well They Fit On My 06997s

 

would these fit on a 997tt? perhaps with spacers?

 

how about a 993TT, anyone know for sure that they will fit?

 

I'm surprised at the number of wheel for sale posts where no offset is mentioned. If they would post the offset you could tell pretty easily which model they'll fit and whether spacers are needed or not. Maybe WheelB can post this info for us.

 

....sorry ..since this wheel is made for 996TT i didnt think to post offsets ..but yes they will bolt on both cars ..now you might want to run spacers on either one depending how it looks ..but they will fit ..i just check and champion doesnt have Et offsets stamped on the back of the wheels ..ill call them in a little and see if they can tell me exact offsets ..

 

totally and the fact that people run spacers to make wheels that don't fit fit ... that's as ghetto as you can get and even worse when you think people on this forum are generally well off enough to buy right fitting wheels

 

Actually even Porsche uses spacers on the C4 rears when using the Carrera Sport. The spacers just equalize the differenc in offsets. The Carrera Sport has a rear offset of 67mm while all the other Porsche 19 inch rear wheels have an offset of 51mm. The 17mm spacer Porsche uses just compensates for the offset difference.

 

If your Chanpion wheels are like mine, there is a stamping on the inside of the wheel barrel that shows rim width and et as part of one long part number.

 

Guys,

The offsets are posted on Champion's website.

Fronts= 45mm
Rears= 44mm

Wheelb posted that the wheels fit the 996tt and c4s models(widebody). Yes, offsets might be helpful but not essential!
-z

 

Recent Fitments-

993:
fronts=yes
rear=no

993tt/c4s(widebody):
front=yes
rears=?(1/2" wider outer/1" wider inner)

996 narrow:
fronts=yes
rears=no

996tt/c4s(widebody):
fronts=yes
rears=yes

997 narrow:
fronts=yes
rears=no

997tt/c4s(widebody):
fronts=yes
rears=yes(1/2" wider outer/ inner same)

 

cool, but porsche or not, there are countless number of vendors that make wheels that truly fit. using spacers is a bandaid. there's no adv to using spacers other than trying to make something fit that does not.

 

that's like saying you have the inseam of the jeans but the waist size is not essential to knowing whether those jeans fit u or not

 

Yeah, if but your waist is a 40 and the saleperson has already stated that he only has a 32, why ask if they will fit!

 

great looking wheels... i wish i had a car to put them on