Out with the old wheel...
Thread Starter
|
Registered User
Joined: Nov 2006
Posts: 177
From: So. Calif.
Rep Power: 28
Out with the old wheel...
Out with the old 4 spoke, in with the new one. Top Stitch recovered it. A nice new update.
Last edited by chinaleeexports; May 30, 2013 at 03:30 PM.
Thread Starter
|
Registered User
Joined: Nov 2006
Posts: 177
From: So. Calif.
Rep Power: 28
Install at the local B dealer in less than an hour. Although they have to do some research due to the buttons aren't working and they cannot get the right computer program to work. It is not throwing any default codes, the dealer is going to check with corporate to find the solutions.
Registered User
Joined: Apr 2013
Posts: 336
From: east sussex,UK
Rep Power: 31
usually the cruise buttons don't work if wrong wheel is set in CM,i don't know whether it can be done with vag com ,is that similar to a VAS machine.
Trending Topics
Thread Starter
|
Registered User
Joined: Nov 2006
Posts: 177
From: So. Calif.
Rep Power: 28
Keep us posted. I would be interested in the swap, but only if everything works.
Eric
I will, the dealer has all of the printouts from the computer and is sending it to corporate for assistance. They previously switched a 3 spoke to a 4 spoke without any issues and were surprised that it did not automatically boot up. They even inputed the car as a 08 in order to try and trick the computer but had the same results. We shall see....the horn works
Eric
I will, the dealer has all of the printouts from the computer and is sending it to corporate for assistance. They previously switched a 3 spoke to a 4 spoke without any issues and were surprised that it did not automatically boot up. They even inputed the car as a 08 in order to try and trick the computer but had the same results. We shall see....the horn works
Registered User
Joined: May 2013
Posts: 56
Rep Power: 15
Looks amazing --- great idea! Would you mind sharing how much the upgrade costs? Also, what do you do to maintain your leather? Your seats literally look flawless (no wrinkling, lines, etc.)... beautiful car!
Thread Starter
|
Registered User
Joined: Nov 2006
Posts: 177
From: So. Calif.
Rep Power: 28
The seats, mats, recovering the steering wheel were all done by TopStitch a sponsor on this forum. The wheel was way expensive and I am totally crazy for doing it but I really wanted to update the look. Every time I think about selling my CGT, I just can't do it. I really don''t know what I would get especially factoring in how much I would have to spend to really upgrade. So I figured if I spent the $$$(3,500 including air bag) on the wheel it was way cheaper than upgrading to another car. 
Last edited by chinaleeexports; Jun 1, 2013 at 10:11 PM.
