Hi, my name is Rashad and im new to forum.

I have been a Bentley owner now for 9 months and loving every moment of it.

Recently i purchased the BENHUR conversion kit and am in need of help with install

 

the guys pep-boys did mine

 

How much did they charge? Ive been getting local quotes here in atlanta

 

Is it only me, but old unit looking better for me.

 

https://www.nav.tv/sites/www.nav.tv/...l_manual_0.pdf

 

Did my own a few months ago. Be careful as that is really a 2 piece unit and the screws that hold the front part of the kit to the back are short and small. I had some just slightly larger laying around and used those. If you ever want to take the radio out to add rca's for amp or route the usb cords the woodgrain bezel is a snug fit and can "pull" them apart. I would suggest running the usb cords to the glovebox now and rca's to the back "just in case" you want to add this stuff later.

FYI. Replacing the radio will give you 3 fault code. One for the phone and I forgot the other two. Just ignore them when you use the software to trouble shoot your car.

 

Any tips on the wiring? Ive been looking at the wiring and I am somewhat lost

 

Yes. At first the instructions may seen a little confusing. But just read it carefully and you should be fine. Its mostly color coded and tells you which wire connects to what. I would solder everything too.

Hit me up if you have and other questions.