@Johnny Hotspur GT You've made so much for comunity, so I think you should have it as a form of "thank you")

 

Thank you @molphar !

I will PM my info.

Johnny

 

Hello @molphar ,
Continuing our conversation from pm, so I can post pictures.

I think what you are saying is that the lover oval now becomes dark except for it being the turn signal now, my lower ovals where never brake lights, they are parking lights only, they match the upper oval parking light, just as the video of the vehicle you saw on the street, in that video it shows both the upper and lower ovals as parking lights, until he hits the brakes, or uses turn signal.

So my confusion is why the 3 plugs on each module, the 1 big plug goes to the turn signal, and 1 other to the lower oval LED, the third plug that you have hooked up to the black and white wires, does nothing, and the lower oval works as a turn signal only without the black and white wires plugged into your module, this is where I am confused, what is that plug supposed to do ?

To be clear, the lower oval turn signal works by just plugging in 2 of the 3 plugs you made.

I think I may have just figured out the third plug, is it so no fault is reported, although, I had no bulb warning fault with it unplugged, just thinking out loud.

Johnny

.

 

Actually third connector is for factory module to think that led is operating as it should. Disconnecting it will couse error light, but not immidiate, only when it will call for check.

I'll connect PWM controller to make it work as factory on that video with parking lights, it will take some time

 

Hi @Johnny - was there a happy end with kind of schema of the connections and wiring and elements to mod etc? can you share the fully working solution?

 

@Johnny Hotspur GT did you install this setup permanantly?

Quite interested in it!!