New Member | Preelude's 2006 Boxster Build Thread

A few updates since my last post:
- Rear quarter vents painted gloss black
- Front bumper + left rear bumperette refinished (front had some chips & rear had a gouge)
- New battery (started getting system fault code due to battery being low)
Last week I decided to take advantage of the nice weather and fall colors! I put some miles on the Boxster and snapped some pics as well!
- Rear quarter vents painted gloss black
- Front bumper + left rear bumperette refinished (front had some chips & rear had a gouge)
- New battery (started getting system fault code due to battery being low)
Last week I decided to take advantage of the nice weather and fall colors! I put some miles on the Boxster and snapped some pics as well!
Last edited by 911obsessed; Oct 15, 2016 at 11:19 PM.

No spacers in the front, 25mm in the rear. I like the current setup, if I chose these wheels again I would do the same spacers. Keep in mind that the type of spacers you use will depend on your specific wheel width and offset.
Looks great. One mod I did on my 987 was to replace the boxster trunk lid emblem with a simple P O R S C H E one and get compliments all the time on it. I also went with 7 and 15mm spacers on my stock 17" wheels and it made a nice look. Mine is a weekend car and still have a BMW for track and autocross. I'll try to post some pics of mine.
Quite frankly one of the best 987’s I’ve heard to date. I’ve been thinking of doing a similar build on an exhaust system however using vibrant bottle resonators. Any more photos or videos of your exhaust system?
Specs:
- Over axle design
- No H-pipe
- 2.5" stainless piping
- 2.5" Vibrant oval mufflers (1102)
- 3.5" Yonaka tips
Hope this helps!
Thread
Thread Starter
Forum
Replies
Last Post
ECS Tuning - VW
VW Vendor Classifieds
0
Mar 22, 2016 02:14 PM






