Do you 955 guys with the pano roof still have the tracks in the roof where the load carry bars are supposed to go?

 

The front rubber weatherstripping may "lift" at speeds exceeding 90mph, resulting in noise. Continuing to drive this fast will make the weatherstrip peel-away at the front corners, flapping at the front. The solution is to clean the plastic channel the rubber tucks into with alcohol, use a Torx T25 driver and loosen the front rails. Lift the front rails and use a body trim-specific plastic spatula and tuck-in the rubber sides and corners. Apply a bead of Shoe Goo inside the plastic channel the stripping and push the loose stripping and set it to cure with blue Painter's tape for 48 hours.