DIY - 958 PCM3.1 Video Interface and Android Module Installation
#61
That's interresting!
Didn't know the Sirius module would be in place....
This step is the most heart faint step, if something goes wrong, I guess the PCM won't power up.....
Didn't know the Sirius module would be in place....
This step is the most heart faint step, if something goes wrong, I guess the PCM won't power up.....
#63
Same here, I tuck the stereo cable thru the brim of the armrest console, then slips the rest in between the carpet and the bottom of the center console.
Totally reversible....
Totally reversible....
#64
Everything goes through a connector, somewhere. No doubt that lead from the armrest goes through one at some point. Trace the wires, find the connectors and then decide how to best integrate with the wiring. I mean, if you're going to go through all this effort it seems kinda foolish to skimp on the last step.
#65
The whole mod, I would say is fairly easy, no split wire.
My experience is that breaking a wire bundle can cost alot and time consuming.
Without proper tool, it might not be easy to re-pin the wires.
Especially if you DIY this project.
My experience is that breaking a wire bundle can cost alot and time consuming.
Without proper tool, it might not be easy to re-pin the wires.
Especially if you DIY this project.
Everything goes through a connector, somewhere. No doubt that lead from the armrest goes through one at some point. Trace the wires, find the connectors and then decide how to best integrate with the wiring. I mean, if you're going to go through all this effort it seems kinda foolish to skimp on the last step.
#66
I tried to remove the glove box but it was stuck on the right side. I couldn't figure out what was holding it up. I also had a tough time with the A/C plumbing for the glove box. I'll try the glove box when I have time.
#67
This project looks very interesting! Excellent work!
I live in Norway, and the FM band is now closing this year. The only possibilities to hear radio is by using DAB+ or internet streaming. As such, I would really like to find a usable solution to integrate DAB+ to the PCM3.1. Does the Android interface have DAB+, or is there any way to integrade DAB+ with the Android or multimedia interface?
I live in Norway, and the FM band is now closing this year. The only possibilities to hear radio is by using DAB+ or internet streaming. As such, I would really like to find a usable solution to integrate DAB+ to the PCM3.1. Does the Android interface have DAB+, or is there any way to integrade DAB+ with the Android or multimedia interface?
#68
Would an universal Android USB DAB+ adapter work with the Android unit, like this one:
http://www.seicane.com/high-quality-...tional-antenna
https://www.solidrop.net/product/ext...avigation.html
or this one:
https://www.aliexpress.com/item/Joyi...693146746.html
The Android DAB+ adapter comes with software, and I would be great if this could be a solution.
http://www.seicane.com/high-quality-...tional-antenna
https://www.solidrop.net/product/ext...avigation.html
or this one:
https://www.aliexpress.com/item/Joyi...693146746.html
The Android DAB+ adapter comes with software, and I would be great if this could be a solution.
#70
I have the 11 Speaker BOSE system. PCM3.1 with V2.64 software.
If i order this kit. will all speakers work even though it is only a stereo input? I suppose it would be the same as plugging a normal 3.1m jack to jack cable in to the AUX?
If i order this kit. will all speakers work even though it is only a stereo input? I suppose it would be the same as plugging a normal 3.1m jack to jack cable in to the AUX?