Corner balancing
Corner balancing
I have an 07 GT3 and had it corner balanced last year, drove 5-6 DE days and about 2000 miles since. Would you have it corner balanced again?
It cost about $2500 last time does that sound right?
Thanks!!
It cost about $2500 last time does that sound right?
Thanks!!
I hope you got the specs from them (basically the ride height of each corner) if so, then get an alignment done with the same specs. That should be pretty darn close.
For $2,500, I'd buy my own scales (you can get a nice one for $1,500 and learn to do it myself - it's really not that difficult).
For $2,500, I'd buy my own scales (you can get a nice one for $1,500 and learn to do it myself - it's really not that difficult).
for $2500, yuo got ripped off BIG TIME.
I hope you got the specs from them (basically the ride height of each corner) if so, then get an alignment done with the same specs. That should be pretty darn close.
For $2,500, I'd buy my own scales (you can get a nice one for $1,500 and learn to do it myself - it's really not that difficult).
For $2,500, I'd buy my own scales (you can get a nice one for $1,500 and learn to do it myself - it's really not that difficult).
that's WAY too much. for that kind of charge, i will quit my day time job and buy CGT's by the dozen.
at 100/hour, that's 15 hours.
if i had one leg and one arm, and one eye, i can do it faster than that.
shop you are going to is charging A LOT of $$
Last edited by Kormaster; Apr 7, 2013 at 08:41 PM.
Trending Topics

Where? Assume you mean for a full track alignment and corner balance? Sounds cheap to me.
i just had a full track alignment and corner weight done at 911 design for 650
shims were additional and i had to use $80 worth



