Brake DIY Day - Fredericksburg Va...
Brake DIY Day - Fredericksburg Va...
Gunther, Justinmm2 and I were talking today while we did Gunther's accumilator, and both guys mentioned they'd like to "do their brakes" while someone who'se done it was providing guidance...
Soooo I'm throwing this out to the group... Since Justin and Gunther both stepped up and asked, We'll be using their cars for the DIY, and I'll offer up the shop and oversight. Anyone wanting to attend and take notes/pics/document is welcome. This is a chance for you guys to get your hands dirty and learn a little more about your P-cars.
So we're thinking the weekend following Thanksgiving weekend, but we'll firm it up and post an update in this thread. Anyone wanting to attend, PM me and I'll send out address/directions as we get closer!
I'm about 1.25 - 1.5 hours south of DC.
Mike
Soooo I'm throwing this out to the group... Since Justin and Gunther both stepped up and asked, We'll be using their cars for the DIY, and I'll offer up the shop and oversight. Anyone wanting to attend and take notes/pics/document is welcome. This is a chance for you guys to get your hands dirty and learn a little more about your P-cars.
So we're thinking the weekend following Thanksgiving weekend, but we'll firm it up and post an update in this thread. Anyone wanting to attend, PM me and I'll send out address/directions as we get closer!
I'm about 1.25 - 1.5 hours south of DC.
Mike
Thanks for the help Mike.
Or should I say thanks for showing me what to do!!
I'm in for the brake DIY and using my car for the demo. I have new front and rear pads ready to install. Doing them on your lift will be way better than of stands in my garage.
Thanks agin!!!
Or should I say thanks for showing me what to do!!I'm in for the brake DIY and using my car for the demo. I have new front and rear pads ready to install. Doing them on your lift will be way better than of stands in my garage.
Thanks agin!!!
^^Mike, sounds fantastic.....I am absolutely ready to learn from the masters of DIY.....
Chris (SEAN996), what was the part I needed to replace again? Mike, I might want to try a DIY of that also if you are open to it.....I'll do all the work, I just need you and Chris's guidance......Thanks and I look forward to the learnings.
Berk
Chris (SEAN996), what was the part I needed to replace again? Mike, I might want to try a DIY of that also if you are open to it.....I'll do all the work, I just need you and Chris's guidance......Thanks and I look forward to the learnings.
Berk
Berk, Find out exactly what it is you need and we'll go from there...Once I know what it is that needs replaced, I can confirm we can do it.
Mike
Mike
Trending Topics
Mike it looks like we are going to have a nice turnout.
For those of you who may want to caravan I'm right off 395 and Duke Street. We could gather at my palce for the 50 minute ride to Mike's place. Let me know?
For those of you who may want to caravan I'm right off 395 and Duke Street. We could gather at my palce for the 50 minute ride to Mike's place. Let me know?
Mike,
Will do. I need to talk to Chris (SEAN996) again, he knew what I needed to swap out. Thanks man.
Berk
Will do. I need to talk to Chris (SEAN996) again, he knew what I needed to swap out. Thanks man.
Berk
If Berk were Jennifer Anistan, I'd enjoy "seeing" him... Instead, I'll just enjoy his company! 

Couldn't resist!
Mike


Couldn't resist!

Mike




