Many of you have heard of the roll bar that we built for Ricky's GTR. My appolgizes for not being able to post this sooner, but better late than never

We spent a lot of time designing this functional roll bar for both track function(following FIA's current rules) and atheistic. The cage is built out of 1 3/4 x.120" chromoly, with tube clamps allowing you to remove the harness bar and cross beam when not tracking. We also Tucked the main hoop as close as possible without rubbing to the B pillar and headliner for it not to be visible through the side and rear windows. The main hoop and cross bar has a slight radial bend to them to strengthen the cage if you ever were in need of it because a roll. By adding a slight radial bend on the top of the main hoop, we strengthen the cage significantly, as the weight of the car would have to force this bend in the opposite direction to try to flatten or collapse our cage.

All connecting joints are with tube clamps allowing you to remove the harness bar and or the cross bar if needed.

Photos are attached below, please let me know if you have any questions if you would like to order a Roll Bar.






Photos of the tube clamps that we use to keep the piping seamless




Photos installed with our Custom Rear Seat Delete






More photos can be found @ our photographers' flickr site.

http://www.flickr.com/photos/spencerberke/...57625736311325/


Our roll Bar is priced at $2,500.00 USD powdered Black or Silver… any other color can be special ordered. We also have a RHD and also a LHD version.

 

You guys did a good job on that roll-bar .

I see you are in San Diego too! I might stop by sometime to check the place out.

 

NICE, definitely interested in this

 

Sure, stop by. We are working on a track Switzer GT-R, EVOms 2011 Panamera Turbo, Switzer 996TT and some benzes at the moment.

We will update/confirm the eta's on this soon. Stay tuned.

 

Price?

Can it come in white?

(Yes, I'm THAT superficial)

 

that looks fantastic! some let me get this straight i can pop off the middle bar with the belts connected to it. So i can put someone back there and then reconnect when i go to the track?

 

looks good!

 

wow..great job...

 

Very nice! And idea when these will be a available.

 

that is correct, the harness bar is completely removable within 1 minute.

 

Yes that is not a problem, we can have it powdercoated whichever color you would like, gloss black, matte black, and satin silver are the standard colors.

We will be installing a few at the end of this month, and will have out next batch available to ship 1-2 week of march.

James@ACG
James@acgsandiego.com
877-422-4736

 

Our Roll Bar will be sold for $2495 on a standard bases, however we are offering an early release price of:

1-4 buyers
$2370 Shipped in the USA
$2700 Installed for Local Customers

5-10 buyers
$2250 Shipped in the USA
$2600 Installed for Local Customers

11+
$2125 Shipped in the USA
$2500 Installed for Local Customers

**California Sales Tax is not included in the prices above**

These prices will be good for the month of Feb, unless we hit the 11+ mark then I'll keep the price open all the way until the end of March.

A $1000 deposit will be required to get one of your roll bars reserved for you, the remaining will be due at delivery, as we must wait to see where the pricing ends.

Please give me a call at 858-633-1018
Or email me at James@ACGsandiego.com to place your order.

 

currently at 5 buyers so far guys

 

We are getting a few more roll bars late this week early next week... Let me know if you would like to put your name on one.