I am wondering that any of you use Durametric SW to reset interval service for 2016 Porsche - any models successfully. Durametric SW only supports 2015 Porsche. I know for fact the Durametric does not support 2017 Porsche. For panamera Base/4, 2015 and 2016 are very much the same. Durametric should work on any model of 2016 Porsche panamera and 911. Durametric told me they DO NOT plan to support 2017 and on ... SAD ...
Please let us know if you have any issues with 2016 Porsche.

Thank You

 

From what I remember, Panamera that is supported by Durametric, so far is only the 970 model, 2010-2013.
There is no 971 support per my observations, and per durametric support comments.

 

My pan4 is 2016, bought 2015. Durametric is working so far to reset the service interval. Not sure with 2016 in 2016, I bring my pan4 into FJ porsche tomorrow for the door handle issue under warranty, I will ask the SA and manager about the computer system in Panamera 2016.
here is what Durametric states in the website.

What cars does it work on?

• 1989-1995 Porsche 928
• 1990-1992 Porsche 944
• 1992-1995 Porsche 968
• 2004-2006 Porsche Carrera GT (980)
• 1990-1994 Porsche 911 (964)
• 1994-1998 Porsche 911 (993)
• 1998-2004 Porsche 911 (996)
• 2005-2012 Porsche 911 (997)
• 2012-2015 Porsche 911 (991)
• 1997-2004 Porsche Boxster (986)
• 2005-2012 Porsche Boxster (987)
• 2013-2015 Porsche Boxster (981)
• 2003-2007 Porsche Cayenne (955)
• 2008-2010 Porsche Cayenne (957)
• 2011-2015 Porsche Cayenne (958)
• 2010-2015 Porsche Panamera (970)
• 2005-2013 Porsche Cayman (987)
• 2014-2015 Porsche Cayman (981)

 

970 panamera is 2010-2013
971 panamera us 2014 and later

you may have bit of luck with reset, have you tried accessingvany other functions? There were threads earlier in the year, and i remember 971 folks couldnt use durametric.

your shop doesnt use durametric. Thed y have the PIWIS2 system.

 

Yes, I only use durametric to reset service interval. WORKING . I had problem with durametric to access the door function, and seating memory. no response - errors . You are right ...

 

I have always thought that my 2016 s e-hybrid was a 970 and that 971 didn't begin until 2017 model year? who knows if this is right, but i have seen it a few places online which was where i came up with my understanding, according to this link 2013-2016 are "970.2"...
https://www.stuttcars.com/porsche-mo...anamera/970.2/

 

You are right durametric will work for all 970.xx, but not 971. Is your Durametric working with your 2016 Porsche? Durametric is working with 2016 pan4, that is all i care. Please share with us if your durametric has problem with your model.

 

Doug, i had previously read that it works with all 970.xx, so assumed that it also worked with all 2016 models, but i can't confirm. thankfully, i haven't needed one yet with only ~5k miles and ~9 months on my car since i bought it. i read all of these threads because i'm interested in experiences with durametric and icarscan x431 since i'm on the fence with regards which tool to buy. i responded above to clarify in the event it impacts someone else's decision. the fact that you are having issues with it on a 2016 impacts my decision...

 

I have Enthusiast Kits Durametric to reset all the service interval for my 2016 PAN4 970.2 . That's all I have been using. I have 2 Porsches, 1 left for future. This Enthusiast Kits can only allow to do 3 Porsches.

 

So far 2016 pan can only reset service interval. Nothing else. Per users on here.
so try going to a subsystem and try doing some diags or adaptation. Anythjng. Bet is you cannot because durametric only supports up to 2014 for that. Exactly what OP wanted to verify. Thanks.