When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
You my friend are miles ahead of me so I should be taking advice by you. My tuner has suggested main things are:-
- do not place the injectors in any hoses - might seem obvious but have seen it many times before - if you get a boost leak on a turbo to intercooler hose etc or intercooler to y-pipe you will be spraying methanol over your engine!
- put the injectors far enough back on the y-pipe so it has time to turn to a vapour
- set up the control based on injector duty cycle not boost - IDC is always okay but if you have small boost leak then by boost you are affected
- make sure you set the IDC low enough so that when you need the meth, it will be in the cylinders
- keep all the lines away from anything hot
- run with water first to make sure it is leak proof - then when sure run Methanol
- run with a large enough tank - 9e use 2.2 gallons
- use the sports chrono to mount the gauge
After a chat with Richard at Aquamist.co.uk, it's really important also to mount the jets correctly and not through a thick walled charge pipe or bung... that would make the spray go to dripping and not the best !
After a chat with Richard at Aquamist.co.uk, it's really important also to mount the jets correctly and not through a thick walled charge pipe or bung... that would make the spray go to dripping and not the best !
I'll be getting extended tall jets to help.
Your car is really moving forward very fast.
Can you give more info about the correct/optimum way to mount the jets?
Can you also post some 100-200kph numbers for european folks?