When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
After researching different AUX/Bluetooth options, I got the unit working... Pretty simple!
Here is the wiring setup... As the diagram with the unit was very unclear.
Works with Bluetooth and AUX. The other downside is that when an AUX cable is attached your bluetooth doesn't work. In order to use the Bluetooth, you must disconbnect the AUX cable from unit. Not the worst. Aftr holding down buttons '1-4-8' on the key pad to reset the PCM, everything worked perfect.
PCM connections:
(L) Light out (routes to the (L) AUX unit)
(R) Light in (remains attached to clip)
AUX connections:
(L) connects to PCM (L) Light out
(R) connects to the removed (L) Light out cable
Constant 12v power @ PCM:
(+) Red w/ yellow stripe
(-) Brown wire
Last edited by CayenneDream; Mar 10, 2018 at 11:57 AM.