Stuart's Paint and Body Techart MASTERPIECE!
Thread Starter
|
Former Vendor
Joined: May 2009
Posts: 700
From: DFW
Rep Power: 0
Stuart's Paint and Body Techart MASTERPIECE!
Hey Hey!
Once again, we were put up to the challenge, this 997 TT transformed into a masterpiece.
As you will see, we spent many hours making sure everything was flawless!
We did everything from custom mounted screens to custom LED foglights.
Work overview:
Front end: Custom mesh grills made, they actually install on the radiators.
LED’s: Techart upgrade daytime running lights, LED fog lights, custom fit duck work up and front re-trimmed and fit.
Bumpers: bumper shocks aren't tampered with, the very edges of the bumper rebar had to be cut off.
Of course our signature GT2 grills, Techart rockers and a new decklid and wing.
Rear bumper: Aftermarket EVOM intercoolers, had to re-cut and re-fit the Intercoolers and all the duct work had to be re-shaped and molded. All brackets had to re-cut and re-done. The lower rear diffuser had to be modified for aftermarket exhaust.
Once again, we were put up to the challenge, this 997 TT transformed into a masterpiece.
As you will see, we spent many hours making sure everything was flawless!
We did everything from custom mounted screens to custom LED foglights.
Work overview:
Front end: Custom mesh grills made, they actually install on the radiators.
LED’s: Techart upgrade daytime running lights, LED fog lights, custom fit duck work up and front re-trimmed and fit.
Bumpers: bumper shocks aren't tampered with, the very edges of the bumper rebar had to be cut off.
Of course our signature GT2 grills, Techart rockers and a new decklid and wing.
Rear bumper: Aftermarket EVOM intercoolers, had to re-cut and re-fit the Intercoolers and all the duct work had to be re-shaped and molded. All brackets had to re-cut and re-done. The lower rear diffuser had to be modified for aftermarket exhaust.
Last edited by StuartsPNB; Dec 23, 2009 at 02:10 PM.
Thread Starter
|
Former Vendor
Joined: May 2009
Posts: 700
From: DFW
Rep Power: 0
Feel free to stop by for a tour anytime.
I'm a PM away, let me know!
-Nathan
Registered User
Joined: Nov 2007
Posts: 109
From: South East Texas
Rep Power: 23
Great Job. Did you build the wire covers for the radiators? I would be interested in doing this for my car.
Trending Topics
Thread Starter
|
Former Vendor
Joined: May 2009
Posts: 700
From: DFW
Rep Power: 0
Yes we did! Please PM me you name/# and I will have Stuart himself give you a ring.
Have a great day.
-Nathan
Thread
Thread Starter
Forum
Replies
Last Post
HotRod
Automobiles For Sale
1
Sep 10, 2015 07:17 PM
