unscrewed all 8 13mm bolts around the turbo, unscrewed the 2 6mm allen head bolts holding the straps, have all 4 sensors wires dangleing down free of getting hooked on anything. The bendable bracket that holds the mufflers on it is pretty much still there, I unscrewed the 2 6mm allen head bolts pushed the straps back so the exhaust should drop down. No luck with getting the stock exhaust off. Been trying to get it free for quite a while now.

I read over a few different exhaust installation guides on a few different forums but was mainly following this one:

http://www.turbo911.com/showthread.php?t=291

************************************************** *************

Ok I found out what I didn't do. I didn't wiggle the straps to the side. After that it slid right out.

 

Did you undo the heatshield off the side of the turbo? 1 10mm bolt (head size). Then shove it to the rear, and work it out. It helps to have 2 people doing this job.

 

Lol, didn't see that you figured it out there at the end, lol

 

haha thanks for the help anyways!