Will 335/30/19s fit on 996 GT2...
Registered User
Joined: Jun 2006
Posts: 1,482
From: Kansas City
Rep Power: 123
Scott, I've just been through this with my 19s. It was for my 3 inch piping with my new setup, not 335s. I spoke with Mark and Rhonda at FVD. They were very helpful. I'd recommend em. Also, I think Tial something or other had a pic of his car with 335s a few months ago. You could try searching for that thread. Hope it helps.
Thread Starter
|
Registered User
Joined: Jun 2005
Posts: 8,509
From: Virginia, USA
Rep Power: 790
Scott, I've just been through this with my 19s. It was for my 3 inch piping with my new setup, not 335s. I spoke with Mark and Rhonda at FVD. They were very helpful. I'd recommend em. Also, I think Tial something or other had a pic of his car with 335s a few months ago. You could try searching for that thread. Hope it helps.
So...do they fit on your car? My piping might be in the way as well.
Registered User
Joined: Jun 2006
Posts: 1,482
From: Kansas City
Rep Power: 123
I think your car has 3 inch pipes too. I sorta doubt you'll be able to get a 335 in there with that pipe from what I've seen.
Trending Topics
Thread Starter
|
Registered User
Joined: Jun 2005
Posts: 8,509
From: Virginia, USA
Rep Power: 790
Well, we don't know yet. Markski is ovaling the 3 inch pipes (really cool) to gain more room and we won't have the spacers for my wheel until this Wed. They're out of the size I need and are coming from Germany. Part of the problem are my 305 tires. If it doesn't fit I'll either have to get 295s or go with my 996tt wheels with their different offsets.
I think your car has 3 inch pipes too. I sorta doubt you'll be able to get a 335 in there with that pipe from what I've seen.
I think your car has 3 inch pipes too. I sorta doubt you'll be able to get a 335 in there with that pipe from what I've seen.
I'm not sure if the offset on my HREs is the same as on your 997TT wheels. I guess I need to find out. Thanks.
Registered User
Joined: Nov 2007
Posts: 448
From: AZ
Rep Power: 51
When I went from the (19") 305/30 (I had rubbing) to the 315/25 I have more clearance on my TT. I think I could get the 325/25 in there with no mods or spacers. The profile and alignment have a big influence.
I bought some in anticipation; I have some spare 5 mm spacers if you need them
I bought some in anticipation; I have some spare 5 mm spacers if you need them
Last edited by Danyol; Oct 30, 2009 at 10:37 PM.
Thread Starter
|
Registered User
Joined: Jun 2005
Posts: 8,509
From: Virginia, USA
Rep Power: 790
When I went from the (19") 305/30 (I had rubbing) to the 315/25 I have more clearance on my TT. I think I could get the 325/35 in there with no mods or spacers. The profile and alignment have a big influence.
I bought some in anticipacion; I have some spare 5 mm spacers if you need them
I bought some in anticipacion; I have some spare 5 mm spacers if you need them
Thanks, Dan. I'll keep it in mind.
