Reverse Logic Jack Pad for Porsche
#1
Reverse Logic Jack Pad for Porsche
Fred from Reverse Logic just released a Jack Pad for Porsche.
http://www.reverselogic.us/shop.html...22&id=36826619
If you ever used any other Reverse Logic Jack Pads, you know they are the very best available.
http://www.reverselogic.us/shop.html...0&sort=nameAsc
Previously the Reverse Logic C5 Jack Pad was the best option we had (and I prefered it, by far, over the Rennline Porsche Jack Pads).
However, Fred was not satisfied with the C5 pad in a Porsche application.
He asked me to give him some measurements so he could build a new Porsche specific Jack Pad.
It works great and it is low profile enough to let my jack slide right under it on my SPASM 991S.
I have a pre-production sample and I would like to send it to someone else to test.
If you have a 991 GT3, post here and then PM me your address and I will send it to you.
I want to try a 991 GT3, because they are even lower than my car and I am curious if it will still clear.
If not, no worries as it does clear a 991S w/ SPASAM, which is a great acomplishment
http://www.reverselogic.us/shop.html...22&id=36826619
If you ever used any other Reverse Logic Jack Pads, you know they are the very best available.
http://www.reverselogic.us/shop.html...0&sort=nameAsc
Previously the Reverse Logic C5 Jack Pad was the best option we had (and I prefered it, by far, over the Rennline Porsche Jack Pads).
However, Fred was not satisfied with the C5 pad in a Porsche application.
He asked me to give him some measurements so he could build a new Porsche specific Jack Pad.
It works great and it is low profile enough to let my jack slide right under it on my SPASM 991S.
I have a pre-production sample and I would like to send it to someone else to test.
If you have a 991 GT3, post here and then PM me your address and I will send it to you.
I want to try a 991 GT3, because they are even lower than my car and I am curious if it will still clear.
If not, no worries as it does clear a 991S w/ SPASAM, which is a great acomplishment
#2
Lunarx, that looks like a nice solution. I have a CS2 with SPASM, so not sure I can add any value testing it since I think you have the same car, but would be glad to it it could help in any way.
Do the 991's have the 25mm or 30mm pin?
Do the 991's have the 25mm or 30mm pin?
#3
I should have clarified.
Don't buy any of the Pin versions, unless your jack has a lift out saddle (with pin base).
The Pin version is intended to replace the lift out saddle, so you get even more clearance.
So the pin is a function of the saddle, on your jack, and not the 991.
I have only seen that type of saddle on professional grade steel jacks.
Naturally Fred has a lot of those types of customers and needed to make a product for them also.
Don't buy any of the Pin versions, unless your jack has a lift out saddle (with pin base).
The Pin version is intended to replace the lift out saddle, so you get even more clearance.
So the pin is a function of the saddle, on your jack, and not the 991.
I have only seen that type of saddle on professional grade steel jacks.
Naturally Fred has a lot of those types of customers and needed to make a product for them also.
#4
John's 991,
Do you have smaller OD 19" track tires on your car?
If so, I can send it to you, as that would be interesting to test.
Either way, I will send it, if you want, as long as you would be willing to forward it to a GT3 owner, should one ever materialize.
Do you have smaller OD 19" track tires on your car?
If so, I can send it to you, as that would be interesting to test.
Either way, I will send it, if you want, as long as you would be willing to forward it to a GT3 owner, should one ever materialize.
#6
FYI - I also picked up some 2024 Aluminum Lug Bolt Guides
http://www.reverselogic.us/shop.html...05&id=27717487
These have the wheel friendly Straight Knurl.
Although the Stainless Versions are awesome the Cross Knurl is rough on the wheels.
http://www.reverselogic.us/shop.html...05&id=27717487
These have the wheel friendly Straight Knurl.
Although the Stainless Versions are awesome the Cross Knurl is rough on the wheels.
Thread
Thread Starter
Forum
Replies
Last Post
2lflat4
Automotive Parts & Accessories For Sale/Wanted
2
11-18-2019 05:05 PM
joseph_number1
Automotive Parts & Accessories For Sale/Wanted
12
07-19-2018 05:45 PM