Fred from Reverse Logic just released a Jack Pad for Porsche.
http://www.reverselogic.us/shop.html...22&id=36826619



If you ever used any other Reverse Logic Jack Pads, you know they are the very best available.
http://www.reverselogic.us/shop.html...0&sort=nameAsc

Previously the Reverse Logic C5 Jack Pad was the best option we had (and I prefered it, by far, over the Rennline Porsche Jack Pads).

However, Fred was not satisfied with the C5 pad in a Porsche application.
He asked me to give him some measurements so he could build a new Porsche specific Jack Pad.

It works great and it is low profile enough to let my jack slide right under it on my SPASM 991S.



I have a pre-production sample and I would like to send it to someone else to test.

If you have a 991 GT3, post here and then PM me your address and I will send it to you.
I want to try a 991 GT3, because they are even lower than my car and I am curious if it will still clear.

If not, no worries as it does clear a 991S w/ SPASAM, which is a great acomplishment

 

Lunarx, that looks like a nice solution. I have a CS2 with SPASM, so not sure I can add any value testing it since I think you have the same car, but would be glad to it it could help in any way.

Do the 991's have the 25mm or 30mm pin?

 

I should have clarified.
Don't buy any of the Pin versions, unless your jack has a lift out saddle (with pin base).
The Pin version is intended to replace the lift out saddle, so you get even more clearance.

So the pin is a function of the saddle, on your jack, and not the 991.
I have only seen that type of saddle on professional grade steel jacks.
Naturally Fred has a lot of those types of customers and needed to make a product for them also.

 

John's 991,
Do you have smaller OD 19" track tires on your car?
If so, I can send it to you, as that would be interesting to test.
Either way, I will send it, if you want, as long as you would be willing to forward it to a GT3 owner, should one ever materialize.

 

Thanks Lunarx, sent you a PM.

 

FYI - I also picked up some 2024 Aluminum Lug Bolt Guides
http://www.reverselogic.us/shop.html...05&id=27717487




These have the wheel friendly Straight Knurl.
Although the Stainless Versions are awesome the Cross Knurl is rough on the wheels.