I was going to go purchase 2 sets of 15mm spacers for the front and rear of my turbo. Now I was inclined to get 7mm for the front and 15mm for the rear but many of you say 15 all around is perfect even when lowered with H+R Springs.

Does anybody have a picture of their stock turbo lowered with 15mm spacers all around, or any spacer setup for that matter?

I may end up buying 3 sets just to try it out but I don't want ANY rubbing on fenders, quarters and especially fender liners.

Thanks for the Help.

 

This is 15 out back and 7's out front. not the best pic but def looks much better

 

The rear looks like it will rub in these pics. I don't know what to do, it is killing me.

Raymond

 

they sure do look like they will rub..........do they cohare?

 

I dont even think I am going to bother with spacers. Forget stock wheels...

 

They did not rub at all. I slammed it down with some h&R coilovers and no rubbing at all. The suspension moves up and in with the travel.

I would have stayed with stock wheels and spacers if I hadnt found my favorite champions used. I just couldnt pass it up.

 

Thanks for the reply, I guess it is just the angle of this picture. Those Champions are dope

 

15s all around will work fine. No rubbing.

Get 60mm bolts., They work for BOTH 7 and 15mm spacers.

 

Any spacer manufacturer recommendations....RUF, H&R, or retailer....sleezbay has them for about a hundred bucks, but im not sure if i wanna be riding on ebay spacers...

 

H+R 15mm Retails for 129, bolts 4.95 each. Don't buy ebay...

 

Thanks man, do those spacers it makes a differnce for sure!