Hey guys,

I am in the process of buying a Kenwood DNX7100 Nav head unit. Currently my A/C control is above my radio, but since the DNX7100 is double DIN I need to move the control below my CD storage.

My question is: Do any of you guys have the part number or numbers for everything that is needed to move the A/C control?

Thanks in advance!!

Adam

 

good question.... im in a similar situation.. i was just gonna call porsche parts....

 

If you get the number/numbers, please post them here...Thanks!!!

 

Yes please post!

I thought maybe just relocate and the wiring will reach? Never looked though.

 

That may be the case, but the trim piece is definitely different. If you look at the trim piece around the A/C control it is perfectly square. The far bottom location where I am planning to move the A/C control isn't square...the bottom sides are rounded in.

Hopefully all I need is the trip piece, but there may be a bracket or special mounting piece that is needed.

I'm totally stumped here...I can't find any part numbers.

 

I'm also looking at buying the kenwood so need to move the A/C down. In my car I have a sunglass tray on the bottom of the console which is more useful than the dicky CD holders in the top console tray, so I want to move the A/C controls to the top of the console. A quick measurement has the A/C controls about the same height as the CD holders, so I may be able to get away with a trim peice on the sides only, however not sure how the A/C controls are mounted & secured in the console?

Any further info on the A/C retrofit would be appreciated.

 

call sunset prosche..they have all these trim parts and know what u need

 

I have the same setup with the cubby hole below the CD storage. I ordered a new cubby hole that fits in the spot where the CD storage was, that way I don't lose what little storage there is in the turbo.

 

Well Stephen Kaspar came through for me.

The part number is: 996 552 339 00 O1C

Thank you Stephen!!

 

Here is a link to the part:

http://www.pcars.com/porsche_parts/s.../p_142803.html

I looked up the part on a couple sites and I got the cup holder, but I found it here!!

 

so then nothing elles is needed... i/e wiring harness or brackets right?

 

I don't know for sure, but according to Stephen @ Imagine Auto this is all I need.

I just ordered the part, so I will let you know whenever I do the install.

 

Adam-

Great find - i was planning on going to the dealership sometime this week and ordering that part and a new storage peice (mines in fine shape but i just want it all to look brand new)

any chance you have a link to the storage bin on that site - there are a few thousand items in the misc. tab

Thanks

 

I wish I could say I found it, but Stephen did.


Here is a link to the page with the upper storage bin on it. It is about 1/3 way down the page. There is an option for the top or bottom cubby hole, so you can get whichever you need.

http://eagleday.com/interiortrim3.html

Adam

 

Ah forgot about eagleday - Thanks!