K24 - Page 5 - 6SpeedOnline - Porsche Forum and Luxury Car Resource

Nov 7, 2010 | 02:01 PM

#61

Zeroh

Registered User

Joined: Mar 2009

Posts: 99

From: London

Rep Power: 22

Quote:

Originally Posted by D33PBLU3

I made the switch to K24's a few years ago, I currently have UltimateMotorWerks 2c which are the K24/26's. PRCHE951 has nearly the identical setup, but his has the 16's, his car feels violently faster than mine, but in reality whoever gets the jump will take it.

The one thing you will notice, max boost is at about 3800 (pending intake, etc) which is 750-950rpm higher than the 16's. Depending how you look at it, it can be an advantage or disadvantage. I have a ton of power in the upper rpms and yet very drivable in the lower, whereas the 16s are torque-ier down low but run out of steam quicker than the 24's. I guess it comes down to your driving style and where you want the peak power.

Something else to think about, both f our systems are detuned to save the rods, however the 2c has more potential through the rpm given a rebuild.

Hope this helps.

You have any 60-130 times for your set up ?... interested to hear how fast the 24/26 UMW turbos run.

Nov 7, 2010 | 09:17 PM

#62

1q2w3e4r

Registered User

Joined: Oct 2006

Posts: 261

From: Sydney, Australia

Rep Power: 30

Good question

I'd also be interested to know the trap speed of a k24/18g car with just an exhaust and flash vs a K16/16G car with the same mods.

Nov 8, 2010 | 01:47 PM

#63

Mark @ AIM Performance

Basic Sponsor

Joined: Dec 2009

Posts: 6,584

From: S.Plainfield, NJ

Rep Power: 856

Quote:

Originally Posted by pumptech

you made 508-516rwhp on stock K24's or 24/18?

FVD Race K24s which are pretty close to stock K24s

__________________
#TeamAIM
997TT SilverSpool - 210.8 mph 1/2 Mile WR Apr 2019, 9.2 @ 168 mph 1/4 Mile Manual World Record , 3.15 60-130 mph , 2.72 100-150 mph , 1400whp E85
996TT SpoolBus - 204.6 mph 1/2 Mile 996TT WR Aug 2018, 9.5 @ 154 mph, 3.23 60-130 mph, 2.5 100-150 mph Manual Porsche World Record, 1400whp E85
997TT SlowBerry - 205.0 mph 1/2 Mile WR Nov 2018, 9.7 @ 170 mph 1/4 Mile , 3.2 60-130 mph , 2.4 100-150 mph , 1420whp E85
ESMOTOR | DO88 | TPC DSC | SYVECS | COBB | IPD | KLINE | XONA | AMS | ID | ERP | SACHS | TURBOSMART | CSF | DODSON |

Nov 8, 2010 | 02:10 PM

#64

ttboost

Registered User

Joined: Jul 2008

Posts: 6,453

From: CT

Rep Power: 439

Quote:

Originally Posted by prodigymb

FVD Race K24s which are pretty close to stock K24s

That's what I bought, used, sent them to Blouch and was told they ARE K24's, supposedly ported?

Nov 8, 2010 | 02:28 PM

#65

Mark @ AIM Performance

Basic Sponsor

Joined: Dec 2009

Posts: 6,584

From: S.Plainfield, NJ

Rep Power: 856

Quote:

Originally Posted by ttboost

That's what I bought, used, sent them to Blouch and was told they ARE K24's, supposedly ported?

I dont even care what FVD do to these, it's a stupid naming convention - I do know they made more power/torque then any non-hybrid K24 car on that dyno. I am also on stock wastegates, pump gas and 1.0 bar...

Did you buy yours brand new from FVD?