Looking for 700whp
Registered User
Joined: Aug 2009
Posts: 2,496
From: Houston Tx
Rep Power: 187
3076's are pretty much at their limit to make 700whp(1.8bar with race fuel) so your into gt35 territory,
$5500 avg for gt35's (without install)
intercoolers $4500 larger then 3" (without install)
Exhaust $4000 (without install)
Fuel System
$700 Injectors
$1500 Fuel Pump extra Lines and install of this and injectors
$2000-4000 Tune
$3000 You will need Hard Pipes and Blow Through MAF (without install)
2500-3500$ for clutch to hold power 1500$ for install
You will need to remove the Front drive system to reduce rotating mass and drag as most install the second fuel pump where this is.
there are a few more bits and pieces but most sell a kit for around 40k to make this kind of power.
$5500 avg for gt35's (without install)
intercoolers $4500 larger then 3" (without install)
Exhaust $4000 (without install)
Fuel System
$700 Injectors
$1500 Fuel Pump extra Lines and install of this and injectors
$2000-4000 Tune
$3000 You will need Hard Pipes and Blow Through MAF (without install)
2500-3500$ for clutch to hold power 1500$ for install
You will need to remove the Front drive system to reduce rotating mass and drag as most install the second fuel pump where this is.
there are a few more bits and pieces but most sell a kit for around 40k to make this kind of power.
Thread Starter
|
Registered User
Joined: Apr 2011
Posts: 18
From: London
Rep Power: 0
Switzer on their website are offering a 700 whp package for $18k, how much would additionally have to be spent to support this mod?
Trending Topics
Not sure 700whp on pump is a good idea on stock motor. 700whp on a dynojet can be done with 93 and methanol within your budget.
- 3076s 5500$
- 72# injectors 586$
- Tune EPL or Protomotive 2000$
- 2.5" Turbo Inlet pipes 800$
- Stage 3 clutch 1800$ or a twin/triple disk $3000+
- Exahust can be picked up on forums $2000-2500 for a good system
- Aquamist Meth Kit $700-900
14,000 -15,000 in parts will get you close to where you want to be..
- 3076s 5500$
- 72# injectors 586$
- Tune EPL or Protomotive 2000$
- 2.5" Turbo Inlet pipes 800$
- Stage 3 clutch 1800$ or a twin/triple disk $3000+
- Exahust can be picked up on forums $2000-2500 for a good system
- Aquamist Meth Kit $700-900
14,000 -15,000 in parts will get you close to where you want to be..
__________________
#TeamAIM
997TT SilverSpool - 210.8 mph 1/2 Mile WR Apr 2019, 9.2 @ 168 mph 1/4 Mile Manual World Record , 3.15 60-130 mph , 2.72 100-150 mph , 1400whp E85
996TT SpoolBus - 204.6 mph 1/2 Mile 996TT WR Aug 2018, 9.5 @ 154 mph, 3.23 60-130 mph, 2.5 100-150 mph Manual Porsche World Record, 1400whp E85
997TT SlowBerry - 205.0 mph 1/2 Mile WR Nov 2018, 9.7 @ 170 mph 1/4 Mile , 3.2 60-130 mph , 2.4 100-150 mph , 1420whp E85
ESMOTOR | DO88 | TPC DSC | SYVECS | COBB | IPD | KLINE | XONA | AMS | ID | ERP | SACHS | TURBOSMART | CSF | DODSON |
#TeamAIM
997TT SilverSpool - 210.8 mph 1/2 Mile WR Apr 2019, 9.2 @ 168 mph 1/4 Mile Manual World Record , 3.15 60-130 mph , 2.72 100-150 mph , 1400whp E85
996TT SpoolBus - 204.6 mph 1/2 Mile 996TT WR Aug 2018, 9.5 @ 154 mph, 3.23 60-130 mph, 2.5 100-150 mph Manual Porsche World Record, 1400whp E85
997TT SlowBerry - 205.0 mph 1/2 Mile WR Nov 2018, 9.7 @ 170 mph 1/4 Mile , 3.2 60-130 mph , 2.4 100-150 mph , 1420whp E85
ESMOTOR | DO88 | TPC DSC | SYVECS | COBB | IPD | KLINE | XONA | AMS | ID | ERP | SACHS | TURBOSMART | CSF | DODSON |
Last edited by Mark @ AIM Performance; Apr 19, 2011 at 11:24 AM.
Registered User
Joined: Jul 2003
Posts: 2,957
From: Texas
Rep Power: 456
The Switzer package is actually ~670 whp on a dynojet. I know one member with this package and he is very happy. But remember the price does not include installation...
https://www.6speedonline.com/forums/...pkg-996tt.html
https://www.6speedonline.com/forums/...pkg-996tt.html
Registered User
Joined: Apr 2009
Posts: 712
From: Akron, OH
Rep Power: 58
Yup!
And if you add any other toys like rims and suspension and brakes, and a fancy GT2 body kit you are well into $60,000+ in mods. I mean really, I could not spend that much on a HP upgrade and not include brakes and appearance. . . .
there are a few more bits and pieces but most sell a kit for around 40k to make this kind of power.
Registered User
Joined: Feb 2007
Posts: 485
From: Michigan
Rep Power: 68
those turbos are 550HP+ each
Registered User
Joined: Feb 2009
Posts: 838
From: NorCal
Rep Power: 127
Are you sure about that? I was pretty sure it was 93 pump. I think Switzer's "P" in P800 or P700 means Pump. And a crank HP figure...
Also here's a link to 911Tuning's big boy package.
http://911tuning.com/996-Turbo/Softw...50GT-p-87.html
That should be close to 700whp on Pump. I imagine it really shines in the race gas territory, however.
Also here's a link to 911Tuning's big boy package.
http://911tuning.com/996-Turbo/Softw...50GT-p-87.html
That should be close to 700whp on Pump. I imagine it really shines in the race gas territory, however.
Registered User
Joined: Aug 2009
Posts: 650
From: Philadelphia, PA
Rep Power: 107
I believe you're correct. 670 rwhp (dynojet), 93 pump, with 200 cell cats in the exhaust. AFAIK, the package doesn't include a clutch, nor installation charges. Add in both, and you're at, what, $25k-ish? It'd be interesting if Switzer "modified" the package with cat-delete test pipes and A3071's, for a few hundred more. Should hit that 700 figure, I'd think.