6Speeders ..

We will start new project on my friend 996tt , we will upgrade our K24 turbos by 911tuning for sure , and go for 20g ,
I will list the mods :

- k24/20g (911tuning)
- WGs 1bar (911tuning)
- methanol injection
- intake filters direct to the turbos
- tial BOV will be on the Ypipe
- upgraded injectors (still not sure 60lb or 72lb)
- HKS evc6 boost controller
- custom 3" exhaust system
- softronic mafless tune


I just worried about the fueling , but we are going to upgrade the injectors and install inline 044 pump to support fueling !!!

I will list alot of pics once we have all the parts home !

We just looking to get 600whp ! Hope we reach it

Stay tuned

 

Sound like a whole lotta fun to me! Markski will take care of you bro!

Good luck and you are in good hands!

 

I did alot of great projects by him

Hope we get what we want !
Thanks so much for your post

 

Looking forward to the end results!

 

Is that a 6speed or tip car?

 

It gone be 6speed bro

 

Hope it turns out to be what you wanted..

 

i have seen the intake on the turbos and wonder just how safe this idea is. the amount of debis and water it will be subjected to combined with the low mounting position seems like a potential disaster.

can you imagine running thru a large puddle of water or hitting a small piece of retread tire ? just a thought

 

32krazy!
"i have seen the intake on the turbos and wonder just how safe this idea is. the amount of debis and water it will be subjected to combined with the low mounting position seems like a potential disaster.

can you imagine running thru a large puddle of water or hitting a small piece of retread tire ? just a thought"


Where did you see the intake sir? Did I miss something?

 

no clutch??

also, are you running bigger Y pipe im assuming?

if i were you i would do the 997 TT intake manifolds and the Ipd plenum abd TB.

 

Yes , hope so sir

 

In our weather , its too much hot so no rainning

You are sure , it get dirty fast , but i can clean it monthly
I tried this setup and it worked well

 

Thanks for your post ,
I will change the clutch for sure !

We will remain use the stock Ypipe

 

if your going through all these mods, it would be a shame to cut corners....

i would do a real Y pipe, the 997 tt intake manifolds ,the Ipd 74 plenum and TB.

regardless good luck.

 

You are right

We will switch to 2.5" Ypipe with 74 plunim inthe future , i just want to finish the main mods !!
Thanks for your recommendations