The H&R sponsered 996 TT race cars with twin projectors are the inspiration behind my project.
I believe Evans final product will be even better than the super trick H&R headlights.

 

nice work!
GT2/3 headlights do have washers BTW, halogen 996.2 cars do not

 

Any updates?

 

Going to Really look great, want to see the final product. BTW what color of turbo are these going on?

 

They are done- pics very soon!!!

 

Pics very soon. They are done.
The turbo is Seal Grey.

 

pricing?

 

Depends on the build design, components selected & any custom work requested for the headlamps.
Best to PM Evan @ Vision Auto Labs.

 

Tiding up a few loose ends. The HID ballast for the fog light will be externally mounted so a 9006 pigtail was soldered to the factory halogen fog wiring and ran through a rubber grommet in the hole which previously housed the headlight washer.




Crumbling wire casing and exposed wires are no bueno, factory wiring for Bi-Xenon Ballast input repaired.





Since the turn signal bowl was blacked out a brighter LED bulb was installed. Sorry for the crooked pic.






Butyl was used to reseal the lens.




GT3 RSR Lenses are actually race spec and have holes and opening on the lens itself which means the headlights are not weather proof. #BecauseRaceCar





Final "Glamour" shots before being shipped out.

 

Very cool and nice work but the lenses look like shlt and if used on the road I can't imagine they won't get condensation inside right away.

With all that work I would have just used a 996.2 non-litronic light to begin with. Or at least use those lenses.

edit: but you really can't even see the washer lid anymore, very cool.

 

I wouldn't say they look like ****, the lens themselves look great. But I agree there isn't much practicality in having headlight lenses with holes in them and I brought these potential issues up with the owner and he wanted to proceed. His goals of having a unique race inspired headlight trumped all else and the holes were not a huge inconvenience given his intended use of the car.

 

The lenses will get full X-Pel clear protection to seal them from the elements.

 

Thanks Evan- they look super trick.
Rich

 

I would be worried about the lense holes as well. You need a hermetically sealed volume.

 

Any weight savings??

Or, was it purely for looks?