Guys,

It's time to replace my tires on all 4 corners. I'd like to go wider in the rear. How wide can I go on the 10" stock setup?

Thanks in advance!

 

295 is the max i've seen others use.

 

I use a 295/30 on a 11 inch wheel with a 65 offset. No rubbing or issues. I wouldn't go any bigger the thing pushes like a snow plow now.

 

I had 285's on my stock turbo twist 10" wide rears.

 

I have 305/25R19 - it is not just a question of the tire, but your wheels and suspension. I think w/ OE wheels, 295 is the max.

 

Thanks very much for your input guys!

 

you can go 305-30-19 with room to spare with the right offset, rolling your fender edge, and trimming the forward lower portion of you fender liner

 

295/30 on 19" wheels here. Fenders rolled with PSS9. No rub. Looks great. Not sure what offset.

 

i too roll 295's, 19 x 11 65 offset

 

295 is the max on a 10" rim.

 

I run 295/30-18's on the stock rims with a 15mm spacer (2 degrees of camber), no rub.

 

i roll 295's, 19 x 11 with a +67 offset

 

What's the max size you can run on a 10" wide stock wheel with no spacer?

 

Mine are: Rears 315 25 zr 19 fronts 235 35 19

 

Im running 315/25/19s with room to spare when i rolled the fender. H&R springs.

I dont know what " pushes like a snow plow" means. This car hanldles like a go-kart! 245s in the front, you can point the front end to a corner and it will go!