Durametric Data Logging
#1
Durametric Data Logging
if i want to do data logging in 6.0 Durametric
i want to know whats the A/R ,, the boost Pressure and the timing during the full throttele
so can you please tell me Instructions
thanks
yousef
i want to know whats the A/R ,, the boost Pressure and the timing during the full throttele
so can you please tell me Instructions
thanks
yousef
#3
I do not use 6.0B to datalog. I use 5.0.
Boost on demand during WOT is not directly measured.
You need to calculate the value based on ambient atmospheric pressure using Durametric v5 (6.0B variable seems to be labeled differently.)
"Boost pressure of sensor" is an actual value, and it is displayed in mbars. Ambient pressure needs to be recorded as a constant. Under acceleration, the sensor reading needs to b e corrected with the ambient pressure constant.
ie
990 mbar at idle
At 6734 RPM WOT, I will record 2178.75 mbar.
2178.75 - 990 (reading at idle) =1188.75 mbar / 1000 = 1.18 BAR
For Lambda, multiply this with 14.7 and you'll have the correct air fuel ratio.
bob
Boost on demand during WOT is not directly measured.
You need to calculate the value based on ambient atmospheric pressure using Durametric v5 (6.0B variable seems to be labeled differently.)
"Boost pressure of sensor" is an actual value, and it is displayed in mbars. Ambient pressure needs to be recorded as a constant. Under acceleration, the sensor reading needs to b e corrected with the ambient pressure constant.
ie
990 mbar at idle
At 6734 RPM WOT, I will record 2178.75 mbar.
2178.75 - 990 (reading at idle) =1188.75 mbar / 1000 = 1.18 BAR
For Lambda, multiply this with 14.7 and you'll have the correct air fuel ratio.
bob
#5
Log RPM and Advance (which will give you ignition angle or timing.) I should also mention that you need to record Lambda for bank 1 and 2, and at high RPMs, the sampling rate may be insufficient to accurately record Lambda.
I've started to compile a list of useful threads for using Durametric Software.
https://www.6speedonline.com/forums/...-software.html
If you have something useful that you have learned about the software, and would like to share with the community, please let me know so I can add it on.
- bob
bob
I've started to compile a list of useful threads for using Durametric Software.
https://www.6speedonline.com/forums/...-software.html
If you have something useful that you have learned about the software, and would like to share with the community, please let me know so I can add it on.
- bob
bob
Last edited by bbywu; 07-04-2010 at 08:28 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Josh/AWE
991 Turbo
30
04-02-2020 05:38 PM
vividracing
991 Turbo
23
10-02-2015 02:23 PM
ModBargains.com
996 Turbo Vendor Classifieds
0
10-01-2015 11:48 AM