hi all ...

guys , as all of you know am running vr825 package ( THE ONLY MEMBER HERE ) and i faced alot of problems fixing the kit parts , the tranny ..etc !!!


but now i hope e verything will be fine .. anyway i moved to next step so i upgraded my injectors ,, get retune from softronic (( thanks alot scott )) and bought the tiptronic upgrade kit from whiteknite
(member here) and the tranny kit was amazing it shifts now like PDK

i allready running methanol kit ,, IC co2 kit

whats should i do now ?? i do not want to upgrade my engine and run 3.8 engine .. its costy and i do not want to go far ,, what i want more performance ..


am thinking to upgrade my turbos ??? am running stock GT3076 .63
what do you think i should do guys ???

turbos vendors please share us your thoughts..


thanks

Yousef ..

 

which injectors are you using?

 

How bout a Proto E85 Flash? He can work with your existing Softtronic software

 

exactly either engine new map or upgrade your turbo's. Contact me if you need help

 

My injectors are 80lb
And I can not upgrade to E85 because we do not have
E85 stations in kuwait ,,
Abdulla what about upgrading the turbos !!!!

 

Yousef,

You turbos are GT3076.63 basic.

You can upgrade to 3076.82 and then have them modified like: extruded hot sides, clipped, etc...

There is still quite a lot you can do to move the game up without needing to spend major money bro.

Talk to Abdullah, he can help a lot in this matter...

 

Yousef

Dyno your car and see what it puts to the ground.

You should be close to max power on stock internal running GT3076's, optimize your HW\Tune and call it a day.

 

R911 package... How far off is your performance #'s from Emre's or other packages?

 

i'd say yousef sell your turbos and buy GTX3076.82 and Now move your *** and buy a protomotive X pipe from MKS shop in shweikh he have a set there and bigger injectors call abdullah let him to help you to find a deal to swap your turbos and get you a bigger injectors !
thats my advice !

 

his turbos spool faster i think

 

i allready have 80lb injectors yousef

 

Have you dyno'ed your car with the current mods to see what it's putting to the wheels?

I would do that before you make any major changes. It's always best to get an idea of how efficiently you are using the current hardware before making any major changes.

 

i dynod my car and got 660whp in low boost 1.3bar

 

thats not bad at all !
660 ---> 1.3BAR stock engine AWHP ? or on Rear wheel ?

 

X pipe and headers GTX3076.82 ! then lets me & you order a better meth kit !