RWD Turbo= BEAST
Originally Posted by Houstonnailboi
Just got off the phone with mvs motors all you have to do to make it work is remove the two sensors from the front differential and make a bracket and hang it up and you could go 2wd with no PTM error code they have tried it with couple cars I just got off the phone with him 15 minutes ago
I remove my front differential couple months ago but I was having that problem but since I'm putting my car back together with a built motor and everything so I need to fix the issue so I can be on kill by tx2k so the only thing I would need right now is to get the two sensors and solenoidbut if that don't work I'm going to send my ECU in to Todd from protomotive for him to cold my car to a GT 2 setting and that should do the trick
Good luck! People have tried flashing GT2 software with no success due to something about the instrument cluster, even switching to a GT2 gauge cluster didn't work.
Keep in mind, the only thing we have not verified is how traction control (PSM) works on high G corners on the track. It has been reported when a tire leaves the ground on a loaded corner it causes PSM issues.
Keep in mind, the only thing we have not verified is how traction control (PSM) works on high G corners on the track. It has been reported when a tire leaves the ground on a loaded corner it causes PSM issues.
Last edited by mikestyle; Jun 3, 2024 at 08:51 PM.
If you are going to remove the axles, you need to replace them with GT2 Stub Axles as stated earlier in this thread.
Quick update, with the sensors, plugged in but removed from the diff housing. The car has been working flawlessly, I have been in multiple scenarios where I experienced tire lift and zero issues with PASM. Since then I have done B16's with GT2 track spring rates, and GMG adjustable sway bars. The car performs flawlessly, and I'm able to precisely dial in the over/ understeer without the silly awd system getting in the way. RWD conversion is the best mod you can do to any 997.1 Turbo.
Last edited by mikestyle; Nov 10, 2022 at 03:56 PM.



