hi guys

i got a friend who want to sell me his factory GT3 wing but i found out the air filter and cooling fan are different side compare to my C2S

Does anyone out there to it work before?

i knew there are some aftermarket wing there but i love the OEM quality and my friend going to pass his wing for good price

if anyone knew about this please let me know
thanks

 

why not just measure the location of the c2s intake and fan and then modify the gt3 to accomodate it. on the c2s, the bottom side of the decklid is metal.. but on the gt3 is a composite material (smc) and its easy to work with. there may be some cutting and fiberglass work involved.. but its doable.

 

hi thanks for your reply
well your answer is helpful if its doable then i have t o check if its worth it to
modify it cause suncoat porsche selling aerokit for $5000 if its cost me too much to modify it then it wont make any senese to do it

so what about change the air box? is it going to work?

also i am trying to do the whole thing front to rear if i am buying his OEM GT3 rear bumper too what kind center exhaust avaliable on the market will fit on C2S?

 

FVD has an exhaust for the gt3 bumper.

 

you also have to worry about the fan location as well

 

please read post #2

 

if you have a new airbox which does not use c2s intake location, then you should be fine. the gt3 location still let's air in, but on the passenger side rather then the driver side. also, the gt3 decklid has pre-drilled holes for the scoops which the aerokit does not have. the gt3 also has pre-drilled holes for the rubber flap. perhaps for less then 1/2 the cost of the aerokit decklid, you can have a used gt3 decklid.

as for the rear bumper.. you can get an aftermarket center exhaust muffler.. or just get some custom pipes made from your cats to the center.

 

hi
thanks for you valuable info
so you mean if i use new after market open air box or should call it open air filter kit
it will still fit in it?

i just search online found k&n has 63series open filter kit will this one work on the OEM GT3 wing?
and how is engine sound get effect? i dont like too much nosiy on my back
http://www.forcedfed.com/porsche/air...airintake.html

 

id like to see how that looks installed in a cs2