Does anyone have out the rear spoiler/rear valence aftermarket for the 997 GT3?

 

cargraphic does.

http://www.cargraphic.de/stepone/dat...97_09_2006.swf

hope that what you looking for

 

Bill you can also buy the GT3 vent to go on top of the bumper for $45
Simply cut a whole in the nose and drop it in but before you so this check the 997TT forum for tips and placement. PM or call me if you need help doing this right b/c you only get one shot to cut into the bumper!

 

Darren, are you talking about the vent towards the rear sides??? i think my front aero is same as GT3 except for black space on hood but rear sides has the vent, right?
http://seriouswheels.com/2006/2006-P...-1920x1440.htm

http://seriouswheels.com/2006/2006-P...A-1280x960.htm

 

No billy the GT3 rear bumper is one piece that has the vents slatted into the fiberglass, you will also need a new exhaust system as well since the shaping is different b/c the pipes are exiting the center of the car now.

I am just mentioning the black vent that goes in top of the front bumper

If you are talking about doing the rear the bumper must be at least $1400 or so before paint and labor and a new exhaust system would be another 3k most likely

 

For the 5k it would probably cost you to do all this you'd be better off sending the car to EVOMS for a supercharger and bring your stock C2 up to like 400+HP for $10k

 

Hmmm... I think I seen your car before. Do you live on Santana Row?

 

where is Santana Row? i am in new york...

 

Oh, nevermind, it's in SF Bay Area. Another doctor has the exact same car as you have in your sig.

 

Do those front vents fit on a standard front carrera s bumper?

 

Billy this could be more of what you are looking for? I don't know this company but the site is http://revozport.com

Notice GT3 look rear but for stock 997 Twin exhaust outlets

 

For all Porsche 997 model
RevoZport Type RA rear bumper made to exact GT3 style for dual exhaust

$1700

 

 

Just keep in mind that this bumper is made of Fiberglass so it won't bend or give a little if lightly tapped.

 

my main concern here is that the part is from hong kong and i would think i must show the item to a local body shop to see if they can install it...
I assume my factory exhaust tips would fit into the dual exhaust spaces for this GT3 rear bumper ? BTW, would Fabspeed muffler fit into my factory tips as well?
http://www.revozport.com/revozportRT.htm

here is my car...