DME Codes P2178 and P2180
DME Codes P2178 and P2180
I just received my first cel with P2178 and P2180 (Mixture adaption checksum error bank 1 and bank 2) andbody have the translation to what this is and how to fix it?
Thanks, I'll have them checked. I have reset them twice and don't notice any driving issues. CEL comes on every couple of weeks.
Last edited by hjacobs2000; Sep 2, 2007 at 11:50 AM.
Replaced my O2 sensors (all 4) then drove 120 miles without a CEL. CELd again with the following:
P2192 Oxygen sensor control adaptation FRAO bank 1 upper load range
P2194 Oxygen sensor control adaptation FRAO bank 2 upper load range
P2178 Mixture adaption checksum bank 1
P2180 Mixture adaption checksum bank 2
My research says this could be "System Too Rich" issue.
What does "System Too Rich" actually mean and how do I solve this?
Maybe it is a MAF sensor issue.
The car runs perfectly.
P2192 Oxygen sensor control adaptation FRAO bank 1 upper load range
P2194 Oxygen sensor control adaptation FRAO bank 2 upper load range
P2178 Mixture adaption checksum bank 1
P2180 Mixture adaption checksum bank 2
My research says this could be "System Too Rich" issue.
What does "System Too Rich" actually mean and how do I solve this?
Maybe it is a MAF sensor issue.
The car runs perfectly.
Last edited by hjacobs2000; Sep 17, 2007 at 02:25 PM.
Trending Topics
What about these codes:
P2187
Oxy. sensor control adapt. RKAT
bank 1 range near idle speed
P2177
Mixture adaptation checksum
error bank 1
P2189
Oxy. sensor control adapt. RKAT
bank 2 range near idle speed
P2179
Mixture adaptation checksum
error bank 2
I am running a modified SC with AWE cats and the IPD Plenum. Cleaned the MAF and these codes went away.
Just want to be sure I am not running lean!
CATTMAN
P2187
Oxy. sensor control adapt. RKAT
bank 1 range near idle speed
P2177
Mixture adaptation checksum
error bank 1
P2189
Oxy. sensor control adapt. RKAT
bank 2 range near idle speed
P2179
Mixture adaptation checksum
error bank 2
I am running a modified SC with AWE cats and the IPD Plenum. Cleaned the MAF and these codes went away.
Just want to be sure I am not running lean!
CATTMAN
Thread
Thread Starter
Forum
Replies
Last Post





