Does anyone have a wire diagram for the Porsche 997 Turbo LED strips. I am trying to retrofit them on my 996.

There are three wires

one black and two white ones

I assume the black one is ground and one white one is postive and the other is the trigger.

I put 12v and I can't get the leds to turn on.

 

Like this?

 

If that's not enough, I may have the entire 997TT wiring diagram somewhere...

 

I would try reversing the polarity..

 

Not like that.I have tried to swap the LED to parking lights and I found the black is ground but the 2 white one are both positive but each of them only supply 3 of leds(6 in total)So you connect 2 white one together to positive from car they will work fine.

 

thanks guys I got it working. Now I am in the process of replacing all the yellow led with white ones and then wiring them up to light up all the time sort of like the Audi S5 ones.

 

I like that... just like the leds on the 997 mk2. If you are swapping the turn lights into presence lights, this means that you will eliminate the turn lights from the front???

 

I am going to wire it up with a relay so that it they will illuminate when the car is turned on, and only blink when the turn signal is activated.

 

Hey i saw your car at SEMA this year at the Mobil booth. Car looked great!!!

Pls post pics of the white leds when you are done. I would love to check it out.

 

But then it will blink white. If the system has 2 posite wires (one for each 3 leds) i would only turn permanent 3 leds (white light presence) and leave the other 3 leds stock (yellow light for turn signal).

 

Im trying to do the same thing but was unable to find the LED blinkers! Where did you pick them up at?

 

I think he has the OEM 997 turn signals

Edwin