Dear 6speeders,

I just ordered a set of BBS LM in 19x11 50offset, 19x8.5 55 offset and want to put them on the car so they sit flush. I am lowered 1.2" on KW V3's. I would love to have the wheels at a 12, but they only make an 11. Regardless, what are you guys using for:

A. Spacers
B. Locking Lug nuts

I really appreciate the help.

thank you in advance,


Edward

 

Anyone?

 

Cascade,

I have the following set:

• Front (8.5 X 19 ET 53)
• Rear (12 X 19 ET 51)

I installed H&R 14mm on front & 7mm on rear. I should have gone 14mm all around and will probably do so in the near future.



I hope this helps,
Rich

 

Im running LM's with ET50 front and rear. I have fitted a 8mm front and 15mm rear spacer and the wheels now sit almost flush.

 

Neil - did you have to roll your rear fenders?

 

No i havent rolled them but while taking those pics a couple of minutes ago, i noticed slight marking on one of my rear tires so it must have made light contact at some point.

 

thanks - what size are your tires?

I'm running 235/35-19 & 315/25-19

 

Im running the same.
Have just had a look at the arch and it looks like it has touched on a bracket for the rear bumper rather than the arch lip.