After alot of search i found that dyno 997tt rwd is not hard as i Expected !!


Its very easy and simple ..

1- first thing is you need to take out the drive shaft ( easy job )





here is the drive shaft :





2- when i started the car it moved normally , i did not take out any fuse and i checked the break if its stucked on the discs but everything was fine !

3- after that i went to the dyno to see how much HP i will get
but .. before putting the weels on the dyno roll .. i opened the fuses box https://www.6speedonline.com/forums/...7-1-turbo.html

i taked out the fuse 8 and 10 in C row,after that i started the engine but it did not move .. alot of warning signs appeared in the dash
so i repluged the fuse (8) in his place again

so it back moving normaly just ABS/PCM warning appeared on the dash but it moved


Now the dyno ..

the weather was hot 39c , Unfortunately i did not use the CO2 IC spray ( the bottle was empty )
and i set the boost controller to 1.3 bar with meth !!! i just want to know the power in pump gas in mid boost


the car reached 660whp

here is pic of the dyno









what do you think ???

 

Awesome! Thats some really good power as well....Dynojet's tend to read lower than other dynos...Thanks for the diy on rear wheel dynoing also!

 

thanks alot ,, when i install my upgraded parts i will try again with 1.6bar

 

Incredible pull!

 

Nice! That's around 650 whp SAE.

 

What are the trq#'s? Can you post another with torque curve and rpm axis?

 

thanks for your sweet words

 

thanks , to be honset i did the dyno to compare the results now and later after installing the new injectors and upgrad the gearbox

 

am sorry the guy in the dyno did not do the trq#s

 

any internals done to motor?

 

stock internals bro

 

thanks..how long have been running this set-up?

 

8 months ..

you can see the installtion step by step here https://www.6speedonline.com/forums/...7tt-story.html

 

thanks bro

 

I can't imagine being RWD with that kind of power (not to speak about 1k rwhp cars....)....My car loses traction in 3rd gear with only a tune and exhaust!!