Hi , so we are atttempting to replace the clutch in my 09 997tt 6 speed and have run into a snag. Everything is unbolted and the slave is off but it seems we just can't get the untit to slide enough to come off the studs. I can see the fly wheel and the cluth moves freely forward and aft but as soon as we try and remove it it just hits a point where it won't go any further. Is there something we are missing that is still attached, visually there is nothing we can see. Some help would be appreciated.

 

Anyone with experience on this, still can't get the tranny off the studs.

 

Did you remove the pivot shaft?

https://www.6speedonline.com/forums/...h-install.html

 

Thank-you that was holding it back.