06 DB9 loose wing mirrors
#1
06 DB9 loose wing mirrors
Hi All,
I just added a 2006 DB9 Volante to our collection as my wife's car. It's in beautiful condition with only 24k miles. It has just a few minor annoyances that I need to fix or have fixed. Most annoying is that both wing mirrors are loose on their folding mounts (not the glass, the entire structure). They tend to fold in a little at higher speeds, or just find new positions on their own. Can anyone tell me if there is a simple adjustment to tighten up the hinges?
I should also mention that the mirror glass doesn't move at all from the switches. So something it wrong there too but I have't yet investigated. The little lights come on on the switch when you press the left of right button - so there is power there- so my guess is that I have either a switch problem or a wiring problem downstream of the switch. Any advice appreciated.
Thanks,
JR
I just added a 2006 DB9 Volante to our collection as my wife's car. It's in beautiful condition with only 24k miles. It has just a few minor annoyances that I need to fix or have fixed. Most annoying is that both wing mirrors are loose on their folding mounts (not the glass, the entire structure). They tend to fold in a little at higher speeds, or just find new positions on their own. Can anyone tell me if there is a simple adjustment to tighten up the hinges?
I should also mention that the mirror glass doesn't move at all from the switches. So something it wrong there too but I have't yet investigated. The little lights come on on the switch when you press the left of right button - so there is power there- so my guess is that I have either a switch problem or a wiring problem downstream of the switch. Any advice appreciated.
Thanks,
JR
#2
Does the car have power fold mirrors? If so press both the left and right selector buttons at the same time. This should fold the mirrors in and you might hear a loud pop. If so, check to see if the mirrors work, and if they still move when driving.
#3
Thanks for reply. No, I don't have the power folding option. Yesterday I managed to remove one mirror assembly from a door hoping I could get to the hinge mechanism from underneath and adjust it appropriately. Unfortunately there is no adjustment there, so I put everything back together. Do you know how the mirror glass is removed from it's mount in the frame? Going in from that direction might help me with the hinge but I was afraid to try to just pry out/snap out the glass.
Thread
Thread Starter
Forum
Replies
Last Post