Thanks to this thread, I just got my sound back, the 3 fuse fix on my 2015 Speed.
Many, many thanks again all

 

just had the same issue as you. Dealer told me to take out the three 20 amp fuses for a minute and plug back in. If that doesn’t work then unhook the negative battery terminal for a minute. That resets the amp

 

@TheManWithThe7 ,
Did it work for you ?

Johnny

 

Works fine now.
If it happens again, dealer is ordering me another amp.

 

Sound stopped working today from all sources. I checked all the fuses, even pulled the amplifier fuses out one at a time and checked them and replaced and still nothing, after reading through this thread I removed all 3 amplifier 20amp fuses at the same time for about 5 minutes and replaced them and sound is working again. Thank you

 

Perform a hard reset as follows:

• With the press the ignition start button but do not start the engine.
• In the truck, left sidefuse panel, remove fuses 20, 21 and 22.
• Reinsert fuses starting with 22, then 21 and finally 20.

This is what worked for me.

 

How I performed a hard radio/CD reset on my 2017 Bentley Continental GTC.

Press start ignition button but do not start engine.
In the trunk, drivers side fuse panel, remove fuses 20, 21 & 22.

Reinsert fuses starting with 22, then 21 then 20. If your amplifier is functioning properly you should immediate hear audio from your Radio, CD, etc.

 

Hello @Jaguar13 ,
Just for clarification, it doesn't matter in which order one is to remove or reinstall the three 20 amp fuses, as pins 1, 2, and 3 for the positive side are all joined together as they are soldered onto the board, just as pins 4, 5, and 6 for the negative side are soldered in the same manner.

Johnny
.