Misfire on all left side cylinders
Thread Starter
|
Registered User
Joined: Feb 2022
Posts: 111
Rep Power: 0
Hi dear
miss fire on bank 1 or bank 2 engine ecu happens because of short ground at one of the engine ecu’s , the issue is 6 cylinders has high gas pressure and misfiring and stalling and the exhaust catalyst will be hot and red so if thing happens to your car check the bank of the ecu that you have issue with , and re install one wire pin in the engine ecu that is moved from the ecu terminal.
thanks I hope that I can help .
miss fire on bank 1 or bank 2 engine ecu happens because of short ground at one of the engine ecu’s , the issue is 6 cylinders has high gas pressure and misfiring and stalling and the exhaust catalyst will be hot and red so if thing happens to your car check the bank of the ecu that you have issue with , and re install one wire pin in the engine ecu that is moved from the ecu terminal.
thanks I hope that I can help .
Thanks for your help
Thread Starter
|
Registered User
Joined: Feb 2022
Posts: 111
Rep Power: 0
The latest on my saga is that I ordered the computer board from Poland for the EGT sensor on the driver side. Installed it and at last check, the engine light was still out with no codes.
Fingers crossed
Fingers crossed
Registered User
Joined: May 2022
Posts: 38
Rep Power: 0
I cannot take a photo for it at the moment because it’s fix already from before
I remembered that the wire is in a brown color at the angle for the ecu plug connector is going out al lilbit
the thing was making me more angry that when I took my 04 GT to the workshop I told him that I have one ecu wire out
he said no I should make a full check up for it then it’s shown to us that this wire iam talking about is the issue
by the way I paid about 500$ for it 🥲
Thread
Thread Starter
Forum
Replies
Last Post
Evolution MotorSports
996 Turbo Vendor Classifieds
15
Mar 23, 2010 02:07 PM
Evolution MotorSports
997 Turbo Vendor Classifieds
1
Dec 14, 2009 02:26 PM