polish
#2
There are many different polishes used for many different applications. It all depends on the paint and the level of correction needed. For the most part, I use Menzerna's line of polishes and compound for everything and finish with zymol hd-cleanse as a hand polish prior to waxing.
#7
A good wash and clay followed by
Einszett Paint Polish followed by Einszett Glanz Wax (by hand) should get you some great results.
Einszett Paint Polish followed by Einszett Glanz Wax (by hand) should get you some great results.
Trending Topics
#13
As mentioned, there's plenty of great polishes.
Some of my favorites are Menz IP, FPII and I'm about to buy some Meg's M105, I hear tons of great things about it. It will be replacing my Menz PG.
Those are good for the rotary with a cutting or polishing pad.
For the PC or another orbital, I would try some Menz IP as well and Zaino Fusion is good mild polish, both of those with cutting pads.
Josh
Some of my favorites are Menz IP, FPII and I'm about to buy some Meg's M105, I hear tons of great things about it. It will be replacing my Menz PG.
Those are good for the rotary with a cutting or polishing pad.
For the PC or another orbital, I would try some Menz IP as well and Zaino Fusion is good mild polish, both of those with cutting pads.
Josh
Thread
Thread Starter
Forum
Replies
Last Post
detailersdomain
Detailing
4
01-11-2016 09:35 PM
detailersdomain
NY Tri State
0
09-29-2015 08:35 AM
detailersdomain
BMW //M
0
09-29-2015 08:34 AM