GMG World Challenge anti-roll bars for the 997 GT3 and 997 GT3 RS
Over 1 year of development work with our Speed GT WC- 997 GT3 Cup cars and Eibach to develop the ultimate bolt on anti-roll bar upgrade for your 997GT3 and 997GT3RS. GMG Is proud to be the first tuner world wide to offer a complete bolt on anti-roll bar upgrade the GT3 and RS. Racing in the Speed GT series and running on a DOT R- Compound tire has allowed us to use the data and knowledge gained over the years and apply it to a street/track bolt on anti roll bar kit that improves the handling of your car without costing thousands of dollars like the bladed racing versions that we run on our race cup cars.

Designed, developed and tested on our 997 GT3 WC street car, and made for GMG by Eibach exclusively. The World Challenge anti-roll bar features front and rear hollow tube anti-roll bars that are 5 way front and 3 way rear adjustable. The rear bar offers an increase in stiffness from 30 to 80 percent over the stock bar and the front bar offers an increase of 20-50 percent increase over the stock front bar. Complimented by urethane bushings these bars are a must have for anyone who is tracking there GT3 or RS or simply wants to reduce the "push" that these cars exhibit during spirited driving and track use. The GMG WC anti-roll bar kit is sold as a complete kit and is a true bolt on upgrade that requires no modifications to your vehicle and works with the standard sway bar drop links and dampers or any after market damper such as Moton , JRZ or Ohlins.

Sold as front and rear set only with bushings.

Applications: 2007+ 997 GT3 and GT3RS. Also fits all 997S and 997 models.

Price: $745.00 per pair.


* Installation, alignment, track setup, and corner weighing is available at our facility.

** Wholesale inquiries welcome.

 

How about us 996 GT3ers?

 

For all the 996GT3 owners we will have a solution available in approx 45 days.

We are finishing up some final testing and will have production available soon.


Stay tuned!

 

Good to hear!

 

subscribed

 

I have this bars and work great.

 

Since i may be to far away for an install, I have been giving consideration to change my suspension to get rid of the snappy back end and the push in the front. Was contemplating stiffer springs. do you have set up recommendations for the new bars with stock springs and shocks.

 

Nothing better than when a part gets developed from racing....

I'm sure the GT3 owners will be loving these bars.

Good luck at your next GT event!

 

Thanks ....


NJ is the next race and then RA...

We have a ton of other new parts that are being released for GT3 and RS before the end of the new year.

Besure to check out the RA race on Speed Channel - GMG will be highlighted that race..